Command and Driver Index

• $target_name arp_examine: CPU Configuration
• $target_name arp_halt: CPU Configuration
• $target_name arp_poll: CPU Configuration
• $target_name arp_reset: CPU Configuration
• $target_name arp_waitstate: CPU Configuration
• $target_name array2mem: CPU Configuration
• $target_name cget: CPU Configuration
• $target_name configure: CPU Configuration
• $target_name curstate: CPU Configuration
• $target_name eventlist: CPU Configuration
• $target_name invoke-event: CPU Configuration
• $target_name mdb: CPU Configuration
• $target_name mdh: CPU Configuration
• $target_name mdw: CPU Configuration
• $target_name mem2array: CPU Configuration
• $target_name mwb: CPU Configuration
• $target_name mwh: CPU Configuration
• $target_name mww: CPU Configuration
• aduc702x: Flash Commands
• amt_jtagaccel: Interface - Dongle Configuration
• append_file: General Commands
• arm-jtag-ew: Interface - Dongle Configuration
• arm11 mcr: Architecture and Core Commands
• arm11 memwrite burst: Architecture and Core Commands
• arm11 memwrite error_fatal: Architecture and Core Commands
• arm11 mrc: Architecture and Core Commands
• arm11 step_irq_enable: Architecture and Core Commands
• arm11 vcr: Architecture and Core Commands
• arm720t cp15: Architecture and Core Commands
• arm7_9 dbgrq: Architecture and Core Commands
• arm7_9 dcc_downloads: Architecture and Core Commands
• arm7_9 fast_memory_access: Architecture and Core Commands
• arm7_9 write_core_reg: Architecture and Core Commands
• arm7_9 write_xpsr: Architecture and Core Commands
• arm7_9 write_xpsr_im8: Architecture and Core Commands
• arm9 vector_catch: Architecture and Core Commands
• arm920t cache_info: Architecture and Core Commands
• arm920t cp15: Architecture and Core Commands
• arm920t cp15i: Architecture and Core Commands
• arm920t read_cache: Architecture and Core Commands
• arm920t read_mmu: Architecture and Core Commands
• arm926ejs cache_info: Architecture and Core Commands
• arm926ejs cp15: Architecture and Core Commands
• arm966e cp15: Architecture and Core Commands
• armjtagew_info: Interface - Dongle Configuration
• armv4_5 core_state: Architecture and Core Commands
• armv4_5 disassemble: Architecture and Core Commands
• armv4_5 reg: Architecture and Core Commands
• armv7a disassemble: Architecture and Core Commands
• at91rm9200: Interface - Dongle Configuration
• at91sam3: Flash Commands
• at91sam3 gpnvm: Flash Commands
• at91sam3 gpnvm clear: Flash Commands
• at91sam3 gpnvm set: Flash Commands
• at91sam3 gpnvm show: Flash Commands
• at91sam3 info: Flash Commands
• at91sam3 slowclk: Flash Commands
• at91sam7: Flash Commands
• at91sam7 gpnvm: Flash Commands
• avr: Flash Commands
• bp: General Commands
• cat: General Commands
• cfi: Flash Commands
• cortex_m3 disassemble: Architecture and Core Commands
• cortex_m3 maskisr: Architecture and Core Commands
• cortex_m3 vector_catch: Architecture and Core Commands
• cp: General Commands
• dap apid: Architecture and Core Commands
• dap apsel: Architecture and Core Commands
• dap baseaddr: Architecture and Core Commands
• dap info: Architecture and Core Commands
• dap memaccess: Architecture and Core Commands
• davinci: NAND Flash Commands
• debug_level: General Commands
• drscan: JTAG Commands
• dummy: Architecture and Core Commands
• dummy: Interface - Dongle Configuration
• dump_image: General Commands
• echo: General Commands
• ecosflash: Flash Commands
• ep93xx: Interface - Dongle Configuration
• etb: Architecture and Core Commands
• etb config: Architecture and Core Commands
• etm analyze: Architecture and Core Commands
• etm config: Architecture and Core Commands
• etm dump: Architecture and Core Commands
• etm image: Architecture and Core Commands
• etm info: Architecture and Core Commands
• etm load: Architecture and Core Commands
• etm start: Architecture and Core Commands
• etm status: Architecture and Core Commands
• etm stop: Architecture and Core Commands
• etm tracemode: Architecture and Core Commands
• etm trigger_percent: Architecture and Core Commands
• etm_dummy config: Architecture and Core Commands
• exit: General Commands
• fast: General Commands
• fast_load: General Commands
• fast_load_image: General Commands
• flash bank: Flash Commands
• flash banks: Flash Commands
• flash erase_address: Flash Commands
• flash erase_check: Flash Commands
• flash erase_sector: Flash Commands
• flash fillb: Flash Commands
• flash fillh: Flash Commands
• flash fillw: Flash Commands
• flash info: Flash Commands
• flash probe: Flash Commands
• flash protect: Flash Commands
• flash protect_check: Flash Commands
• flash write_bank: Flash Commands
• flash write_image: Flash Commands
• flush_count: JTAG Commands
• ft2232: Interface - Dongle Configuration
• ft2232_device_desc: Interface - Dongle Configuration
• ft2232_latency: Interface - Dongle Configuration
• ft2232_layout: Interface - Dongle Configuration
• ft2232_serial: Interface - Dongle Configuration
• ft2232_vid_pid: Interface - Dongle Configuration
• gdb_breakpoint_override: Daemon Configuration
• gdb_flash_program: Daemon Configuration
• gdb_memory_map: Daemon Configuration
• gdb_port: Daemon Configuration
• gdb_report_data_abort: Daemon Configuration
• gw16012: Interface - Dongle Configuration
• halt: General Commands
• help: General Commands
• init: Daemon Configuration
• init_reset: Reset Configuration
• interface: Interface - Dongle Configuration
• interface_list: Interface - Dongle Configuration
• ip: General Commands
• irscan: JTAG Commands
• jlink: Interface - Dongle Configuration
• jtag arp_init: Reset Configuration
• jtag arp_init-reset: Reset Configuration
• jtag cget: TAP Declaration
• jtag configure: TAP Declaration
• jtag interface: Interface - Dongle Configuration
• jtag names: TAP Declaration
• jtag newtap: TAP Declaration
• jtag tapdisable: TAP Declaration
• jtag tapenable: TAP Declaration
• jtag tapisenabled: TAP Declaration
• jtag_init: Daemon Configuration
• jtag_khz: Interface - Dongle Configuration
• jtag_nsrst_assert_width: Reset Configuration
• jtag_nsrst_delay: Reset Configuration
• jtag_ntrst_assert_width: Reset Configuration
• jtag_ntrst_delay: Reset Configuration
• jtag_rclk: Interface - Dongle Configuration
• jtag_reset: JTAG Commands
• load_image: General Commands
• log_output: General Commands
• lpc2000: Flash Commands
• lpc2000 part_id: Flash Commands
• lpc288x: Flash Commands
• lpc2900: Flash Commands
• lpc2900 password: Flash Commands
• lpc2900 read_custom: Flash Commands
• lpc2900 secure_jtag: Flash Commands
• lpc2900 secure_sector: Flash Commands
• lpc2900 signature: Flash Commands
• lpc2900 write_custom: Flash Commands
• lpc3180: NAND Flash Commands
• lpc3180 select: NAND Flash Commands
• ls: General Commands
• mac: General Commands
• mdb: General Commands
• mdh: General Commands
• mdw: General Commands
• meminfo: General Commands
• mflash bank: Flash Commands
• mflash config boot: Flash Commands
• mflash config pll: Flash Commands
• mflash config storage: Flash Commands
• mflash dump: Flash Commands
• mflash probe: Flash Commands
• mflash write: Flash Commands
• mwb: General Commands
• mwh: General Commands
• mww: General Commands
• nand check_bad_blocks: NAND Flash Commands
• nand device: NAND Flash Commands
• nand dump: NAND Flash Commands
• nand erase: NAND Flash Commands
• nand info: NAND Flash Commands
• nand list: NAND Flash Commands
• nand probe: NAND Flash Commands
• nand raw_access: NAND Flash Commands
• nand write: NAND Flash Commands
• ocl: Flash Commands
• oocd_trace: Architecture and Core Commands
• oocd_trace config: Architecture and Core Commands
• oocd_trace resync: Architecture and Core Commands
• oocd_trace status: Architecture and Core Commands
• orion: NAND Flash Commands
• parport: Interface - Dongle Configuration
• parport_cable: Interface - Dongle Configuration
• parport_port: Interface - Dongle Configuration
• parport_write_on_exit: Interface - Dongle Configuration
• pathmove: JTAG Commands
• peek: General Commands
• pic32mx: Flash Commands
• pic32mx pgm_word: Flash Commands
• pld device: PLD/FPGA Commands
• pld devices: PLD/FPGA Commands
• pld load: PLD/FPGA Commands
• poke: General Commands
• poll: Daemon Configuration
• power: Interface - Dongle Configuration
• presto: Interface - Dongle Configuration
• profile: General Commands
• rbp: General Commands
• reg: General Commands
• reset: General Commands
• reset halt: General Commands
• reset init: General Commands
• reset run: General Commands
• reset_config: Reset Configuration
• resume: General Commands
• rlink: Interface - Dongle Configuration
• rm: General Commands
• rtck: Interface - Dongle Configuration
• runtest: JTAG Commands
• rwp: General Commands
• s3c2410: NAND Flash Commands
• s3c2412: NAND Flash Commands
• s3c2440: NAND Flash Commands
• s3c2443: NAND Flash Commands
• scan_chain: TAP Declaration
• shutdown: General Commands
• sleep: General Commands
• soft_reset_halt: General Commands
• stellaris: Flash Commands
• step: General Commands
• stm32x: Flash Commands
• stm32x lock: Flash Commands
• stm32x options_read: Flash Commands
• stm32x options_write: Flash Commands
• stm32x unlock: Flash Commands
• str7x: Flash Commands
• str7x disable_jtag: Flash Commands
• str9x: Flash Commands
• str9x flash_config: Flash Commands
• str9xpec: Flash Commands
• str9xpec disable_turbo: Flash Commands
• str9xpec enable_turbo: Flash Commands
• str9xpec lock: Flash Commands
• str9xpec options_cmap: Flash Commands
• str9xpec options_lvdsel: Flash Commands
• str9xpec options_lvdthd: Flash Commands
• str9xpec options_lvdwarn: Flash Commands
• str9xpec options_read: Flash Commands
• str9xpec options_write: Flash Commands
• str9xpec part_id: Flash Commands
• str9xpec unlock: Flash Commands
• svf: Boundary Scan Commands
• target count: CPU Configuration
• target create: CPU Configuration
• target current: CPU Configuration
• target names: CPU Configuration
• target number: CPU Configuration
• target types: CPU Configuration
• target_request debugmsgs: Architecture and Core Commands
• targets: CPU Configuration
• tcl_port: Daemon Configuration
• telnet_port: Daemon Configuration
• test_image: General Commands
• tms470: Flash Commands
• tms470 flash_keyset: Flash Commands
• tms470 osc_mhz: Flash Commands
• tms470 plldis: Flash Commands
• trace history: Architecture and Core Commands
• trace point: Architecture and Core Commands
• trunc: General Commands
• usbprog: Interface - Dongle Configuration
• verify_image: General Commands
• verify_ircapture: JTAG Commands
• verify_jtag: JTAG Commands
• version: General Commands
• virt2phys: General Commands
• virtex2: PLD/FPGA Commands
• virtex2 read_stat: PLD/FPGA Commands
• vsllink: Interface - Dongle Configuration
• wait_halt: General Commands
• wp: General Commands
• xscale analyze_trace: Architecture and Core Commands
• xscale cache_clean_address: Architecture and Core Commands
• xscale cache_info: Architecture and Core Commands
• xscale cp15: Architecture and Core Commands
• xscale dcache: Architecture and Core Commands
• xscale debug_handler: Architecture and Core Commands
• xscale dump_trace: Architecture and Core Commands
• xscale icache: Architecture and Core Commands
• xscale mmu: Architecture and Core Commands
• xscale trace_buffer: Architecture and Core Commands
• xscale trace_image: Architecture and Core Commands
• xscale vector_catch: Architecture and Core Commands
• xscale vector_table: Architecture and Core Commands
• xsvf: Boundary Scan Commands
• ZY1000: Interface - Dongle Configuration