orion.c File Reference

Backend for Tentec Orion 565 / 566. More...

#include <stdio.h>
#include <stdlib.h>
#include <ctype.h>
#include <string.h>
#include <unistd.h>
#include <time.h>
#include <sys/time.h>
#include <hamlib/rig.h>
#include "bandplan.h"
#include "serial.h"
#include "misc.h"
#include "idx_builtin.h"
#include <cal.h>

Functions
int	tt565_transaction (RIG *rig, const char *cmd, int cmd_len, char *data, int *data_len)
	tt565_transaction, adapted from tentec_transaction (tentec.c)
int	tt565_init (RIG *rig)
	Basically, it just sets up *priv.
int	tt565_cleanup (RIG *rig)
	tt565_cleanup routine
int	tt565_open (RIG *rig)
	tt565_open routine
int	tt565_set_freq (RIG *rig, vfo_t vfo, freq_t freq)
	Set a frequence into the specified VFO.
int	tt565_get_freq (RIG *rig, vfo_t vfo, freq_t *freq)
	Get the frequency currently set in the specified VFO (A or B).
int	tt565_set_vfo (RIG *rig, vfo_t vfo)
	set RIG_VFO_CURR and send info to physical rig.
int	tt565_get_vfo (RIG *rig, vfo_t *vfo)
int	tt565_set_split_vfo (RIG *rig, vfo_t vfo, split_t split, vfo_t tx_vfo)
	Set split operating mode.
int	tt565_get_split_vfo (RIG *rig, vfo_t vfo, split_t *split, vfo_t *tx_vfo)
	Get the current split status and Tx vfo selection.
int	tt565_set_mode (RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
	Set operating mode to RIG_MODE_x with indicated passband width.
int	tt565_get_mode (RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
	Get op. mode and bandwidth for selected vfo.
int	tt565_set_ts (RIG *rig, vfo_t vfo, shortfreq_t ts)
	Set Tuning Step for VFO A or B.
int	tt565_get_ts (RIG *rig, vfo_t vfo, shortfreq_t *ts)
	Get Tuning Step for VFO A or B.
int	tt565_set_rit (RIG *rig, vfo_t vfo, shortfreq_t rit)
	Set Rx incremental tuning Note: command rit != 0 ==> rit "on"; rit == 0 ==> rit "off".
int	tt565_get_rit (RIG *rig, vfo_t vfo, shortfreq_t *rit)
	Get Rx incremental tuning.
int	tt565_set_xit (RIG *rig, vfo_t vfo, shortfreq_t xit)
	Set Tx incremental tuning (Main TRx only) Note: command xit != 0 ==> xit "on"; xit == 0 ==> xit "off".
int	tt565_get_xit (RIG *rig, vfo_t vfo, shortfreq_t *xit)
	Get Tx incremental tuning (Main TRx only).
int	tt565_set_ptt (RIG *rig, vfo_t vfo, ptt_t ptt)
	Set push to talk (Tx on/off).
int	tt565_get_ptt (RIG *rig, vfo_t vfo, ptt_t *ptt)
	Get push to talk (Tx on/off).
int	tt565_reset (RIG *rig, reset_t reset)
	Restart Orion firmware.
const char *	tt565_get_info (RIG *rig)
	Get firmware identification, e.g., "Version 1.372".
int	tt565_set_level (RIG *rig, vfo_t vfo, setting_t level, value_t val)
	Sets any of Orion's "Level" adjustments.
int	tt565_get_level (RIG *rig, vfo_t vfo, setting_t level, value_t *val)
	Get the current value of an Orion "level".
int	tt565_set_mem (RIG *rig, vfo_t vfo, int ch)
	This only sets the current memory channel locally. No Orion I/O.
int	tt565_get_mem (RIG *rig, vfo_t vfo, int *ch)
	Get the current memory channel number (only).
int	tt565_vfo_op (RIG *rig, vfo_t vfo, vfo_op_t op)
	perform a RIG_OP operation
int	tt565_send_morse (RIG *rig, vfo_t vfo, const char *msg)
	Send a string as morse characters.
int	tt565_set_func (RIG *rig, vfo_t vfo, setting_t func, int status)
	Set an Orion "function".
int	tt565_get_func (RIG *rig, vfo_t vfo, setting_t func, int *status)
	get state of an Orion "function"
int	tt565_set_ant (RIG *rig, vfo_t vfo, ant_t ant)
	Antenna selection for Orion.
int	tt565_get_ant (RIG *rig, vfo_t vfo, ant_t *ant)
	Find what antenna is "attached" to our vfo.

---

Detailed Description

Backend for Tentec Orion 565 / 566.

This documentation is experimental, to see how we can do it for the backends.
This backend tested mostly with firmware versions 1.372 and 2.062a