next up previous contents
Next: About this document ... Up: Dwarf's Guide to Debian Previous: ADDENDUM: How to use   Contents


Index

.deb
Introduction | floppy: | Notes
.dpkg-dist
--configure <package name>
.dpkg-old
--configure <package name>
/boot
Example #2: Complex partitioning | Task 2: Partition the | Task 4: Initializing Linux | Non-Debian Kernel Construction
/dev
cdrom:
/dev/gpmdata
X Configuration using anXious
/dev/psaux
X Configuration using anXious
/dev/ttyS0
X Configuration using anXious
/erc/init.d/network
Preliminary Networking Information
/etc/conf.modules
Advantages
/etc/fstab
Mounting and Unmounting File
/etc/group
Removing a user | File Protection by Group
/etc/hosts
Preliminary Networking Information
/etc/lilo.conf
Non-Debian Kernel Construction
/etc/modules
Task 6: Configuring Driver | Advantages | Disadvantage | Disadvantage
/etc/passwd
Adding a user | Removing a user
/etc/pintcap
Where is the printer?
/etc/sudoers
sudo
/home
The root partitions | Task 2: Partition the | Task 4: Initializing Linux
/lib/modules
Disadvantage
/tmp
The root partitions
/usr
The root partitions
/usr/local
Example #2: Complex partitioning | Non-Debian Kernel Construction
/usr/src/linux
Debian Kernel Construction
/var
The root partitions | Task 2: Partition the | Task 4: Initializing Linux
/vmlinuz
Non-Debian Kernel Construction
[A]ccess
Using dselect
[A]ccess cdrom
0. [A]ccess
[A]ccess floppy
mounted
[A]ccess ftp
floppy:
[A]ccess harddisk
nfs:
[A]ccess mounted
harddisk
[A]ccess nfs
cdrom:
[C]onfig
3. [I]nstall
[I]nstall
Novice use of [S]elect
[Q]uit
5. [R]emove
[R]emove
4. [C]onfig
[S]elect
1. [U]pdate
[U]pdate
Notes
add user
General Configuration | Adding a user
adduser
Adding a user | Adding a user | File Protection by Group
advanced install
System Configuration
ae
ae
Anthony'w Editor
ae
anXious
X Configuration using anXious to X Configuration using anXious
appletalk
Appendix 6: Linux as
apropos
Finding knowledge
apt-get
Introduction | apt-get to Removing packages | Apt Package Installation | Apt Package Installation | Apt Package Installation | Apt Package Installation | Apt Package Installation | Apt Package Installation
apt-get install
Installing Packages
apt-get remove
Removing packages
apt-get upgrade
Upgrading Packages
autoexec.bat
Appendix 4: Multiple OS
available file
Available Packages File Management
base system
A Short History of | Stage One: The Base | Task 8: Installing the
Base System Installation
Task 8: Installing the
binary-i386
--update-avail | --merge-avail <Packages-file> | cdrom: | Appendix 5: Building Packages
boot floppy
Task 10: Creating a
bootable
Task 2: Partition the
broadcast address
Preliminary Networking Information
Bruce Perens
A Short History of
bug tracking
The Debian Development Team
bzImage
Non-Debian Kernel Construction
CD-ROM arguments
Other CD-ROMS to Other CD-ROMS
cfdisk
Task 2: Partition the
chat script
What You Need to | Disadvantage
chgrp command
chgrp
chmod command
chmod
chown command
File Protection by Owner | chown
clock chip
X Configuration using anXious
color depth
X Configuration using anXious
conffiles
--unpack <package file> | --configure <package name> | --purge <package name>
configure modules
Task 6: Configuring Driver | Task 6: Configuring Driver
Configure the Keyboard
Task 1: Configure the
Contents files
Finding packages | Finding packages
contrib
What Makes Debian Different? | --update-avail | --merge-avail <Packages-file>
cp command
cp
dd command
Appendix 3: The Loop
debconf
Apt Package Installation | Apt Package Installation
Debian's Social Contract
Appendix 8: What is
debian/dists
cdrom:
default resolution
X Configuration using anXious
Designated Name Servers
Task 7: Configure the | PPP Configuration
df command
df
dialup
What You Need to
diff
Additional info
disk quotas
The root partitions
DNS
Task 7: Configure the | PPP Configuration
domain name
Preliminary Networking Information | Task 7: Configure the | Task 7: Configure the
--audit
-S | --search <search
--avail
--clear-avail
--clear-avail
Available Packages File Management | Upgrading with dselect
--configure
--unpack <package file> | -C | --audit
--disabled-password
Adding a user
--force
Force Options
--help
--version
--install
Installation and Removal Options | --unpack <package file>
--license
--print-installation-architecture
--list
-L | --listfiles <package
--listfiles
--print-avail <package name>
--merge-avail
--update-avail | --merge-avail <Packages-file> | Notes
--no-force
Force Options
--pending
--configure <package name> | --purge <package name>
--print-architecture
Miscellaneous Options
--print-avail
-s | --status <package
--print-gnu-build-architecture
--print-architecture
--print-installation-architecture
--print-gnu-build-architecture
--purge
-r | --remove <package
--recursive
--unpack <package file>
--refuse
Force Options
--remove
--configure <package name> | --purge <package name>
--search
-l | --list [<package
--status
Package System Information Options | --print-avail <package name>
--unpack
-i | --install <package | --unpack <package file>
--update-avail
-A | --avail <package
--version
--license
dpkg
Introduction | Introduction to --help | Finding packages | Debian Kernel Construction
dpkg-scanpackages
Appendix 5: Building Packages
drivers
Boot Media | Advantages | Disadvantage
dselect
Introduction | -r | --remove <package | dselect to Upgrading with dselect | System Configuration | Apt Package Installation | Debian Kernel Construction | Appendix 5: Building Packages
du command
du
dvips
Where is the printer?
emacs
emacs
fdisk
Task 2: Partition the
find command
Searching the file system
finger command
Adding a user
floppy drive arguments
Floppy Drive Arguments to Floppy Drive Arguments
font selection
X Configuration using anXious
Force Options
Force Options
Free Software
Appendix 8: What is
Free Software Foundation
GNU Free Documentation License
FS type
Task 2: Partition the
fsck
Mounting and Unmounting File
FTP
Preliminary Networking Information
full name
Preliminary Networking Information
fuser
fuser: Who has it? | Who is logged on?
Gateway Address
Task 7: Configure the
gcc
Non-Debian Kernel Construction
gid
File Protection by Group
GNU Free Documentation License
Appendix 9: GNU Free
gpm
X Configuration using anXious
graphics card
X Configuration using anXious
grep
Finding packages
group
File Protection by Group
hard disk arguments
Hard Disk Arguments to Hard Disk Arguments
harddisk boot
Task 10: Creating a
horizontal sync
X Configuration using anXious
host name
Preliminary Networking Information | Task 7: Configure the
HOWTO
Networking Information Sources
Ian Murdock
CREDITS | A Short History of | A Short History of
image files
Appendix 3: The Loop | Appendix 3: The Loop | Appendix 3: The Loop
indices/
Appendix 5: Building Packages
info
Additional info | Introduction
info page
Finding knowledge
init
Mounting and Unmounting File | Advantages | Disadvantage
install.en.txt
Introduction | Boot Media
installation
Installation to Apt Package Installation
Installation Main Menu Options
Task 1: Configure the
installation media
Task 5: Install Kernel
IP address
Preliminary Networking Information | Task 7: Configure the
joe
Installing Packages | Searching the file system | joe
kernel
Task 5: Install Kernel | Building the Kernel | Debian Kernel Construction
kernel arguments
Appendix 7: Arguments to Other Device Drivers
kernel headers
Non-Debian Kernel Construction
kernel source
Debian Kernel Construction
kernel-image
Debian Kernel Construction
kernel-package
Debian Kernel Construction
kernel-source
Debian Kernel Construction
kerneld
Task 6: Configuring Driver | Advantages | Advantages | Disadvantage
keyboard extensions
X Configuration using anXious
kill command
Process Status
less command
Finding knowledge
LILO
Task 10: Creating a | Task 11: Finish Stage | Task 11: Finish Stage | Non-Debian Kernel Construction | Non-Debian Kernel Construction | Debian Kernel Construction | Appendix 4: Multiple OS
Linux Swap FS type
Task 2: Partition the | Task 3: Swap Partition
loadlin
Non-Debian Kernel Construction | Debian Kernel Construction | Appendix 4: Multiple OS | Appendix 4: Multiple OS
logical partitions
Example #2: Complex partitioning | Task 2: Partition the
loop device
Appendix 3: The Loop to Appendix 3: The Loop
losetup
Appendix 3: The Loop
lpc
Finding knowledge
lpd
Where is the printer?
lpq
Where is the printer?
lpr command
Where is the printer?
lprm
Where is the printer?
ls command
ls
lynx
Apt Package Installation
magicfilter
Where is the printer?
make-kpkg
Debian Kernel Construction
man
Introduction
man page
Finding knowledge
Master Boot Record
Task 10: Creating a
MBR
Task 10: Creating a
mc - Midnight Commander
-s | --status <package | --print-avail <package name> | -L | --listfiles <package | -l | --list [<package | Novice use of [S]elect
MD5 passwords
General Configuration
minix
Advantages
mkdir command
mkdir
MKLinux
Appendix 6: Linux as
modules
Task 5: Install Kernel | Non-Debian Kernel Construction | Non-Debian Kernel Construction | Modules | Advantages
monitor
X Configuration using anXious
monitor resolution
X Configuration using anXious
more command
Finding knowledge
mount
Mounting and Unmounting File
mouse type
X Configuration using anXious
Murdock, Ian
CREDITS | A Short History of | A Short History of
mv command
mv
name servers
Preliminary Networking Information | What You Need to
netatalk
Appendix 6: Linux as
netmask
Preliminary Networking Information | Task 7: Configure the
NetWare
Appendix 6: Linux as
network address
Preliminary Networking Information
network configuration
Task 7: Configure the to Task 7: Configure the
networking
Networking Information Sources
non-free
What Makes Debian Different? | What Makes Debian Different? | What Makes Debian Different? | --update-avail | --merge-avail <Packages-file>
other arguments
Other Device Drivers to Other Device Drivers
override file
Appendix 5: Building Packages
Packages files
-r | --remove <package | Available Packages File Management | --clear-avail | --update-avail | --merge-avail <Packages-file> | 0. [A]ccess | Notes | Updating Packages Files | Finding packages | Finding packages | Appendix 5: Building Packages | Appendix 5: Building Packages
pager
Finding knowledge
PAP
PPP Configuration
partitions
The root partitions | Example #1: Simple partitioning | Task 2: Partition the | Task 4: Initializing Linux
passwd
--configure <package name> | Adding a user | Managing passwords | Managing passwords | Managing passwords
PCMCIA
Task 6: Configuring Driver | General Configuration
Peer Authentication Protocol
PPP Configuration
Perens, Bruce
A Short History of
poff
What You Need to
pon
What You Need to
ports
PPP Configuration
PostScript
Where is the printer?
PPP
PPP Configuration Information | Disadvantage
PPP configuration
PPP Configuration to PPP Configuration
PPP modem selection
PPP Configuration
PPP peers
What You Need to | PPP Configuration
pppconfig
What You Need to | PPP Configuration
pppd
Disadvantage
primary partitions
Example #2: Complex partitioning | Task 2: Partition the
printer
Where is the printer?
process status
Process Status
ps command
Process Status
PS/2 mouse
X Configuration using anXious
psmisc
Finding packages
rebooting
Task 11: Finish Stage
rescue disks
Boot Media | Stage One: The Base | Disadvantage
resolution
X Configuration using anXious
resolv.conf
Preliminary Networking Information | Preliminary Networking Information
rm command
Searching the file system | rm
rmdir command
rmdir
rmmod
Advantages
root
Managing passwords | Managing passwords | Managing Root Access | sudo | Disadvantage
root access
Running dpkg
root partition
Task 4: Initializing Linux | The Debian Task Installer
root password
General Configuration | General Configuration
root privilege
Removing a user | Managing passwords
root.bin
Advantages
samba
Appendix 6: Linux as
SCSI device arguments
SCSI device arguments to SCSI argument list
search engines
Appendix 6: Linux as | Appendix 6: Linux as
setserial
Disadvantage | Disadvantage
shadow passwords
General Configuration
simple install
System Configuration
slrn
Installing Packages
sources.list
Selecting Archives | Updating Packages Files
Stage One Installation
Stage One: The Base to Task 11: Finish Stage
Stage Two Installation
Stage Two: Package Installation to Apt Package Installation
status file
-r | --remove <package
Status: field
-r | --remove <package
su
Running dpkg | Managing Root Access | su
sudo
Running dpkg | sudo
swap space
The Swap Partition | Task 2: Partition the | Task 3: Swap Partition | Hardware | Hardware
System.map
Non-Debian Kernel Construction
tasks
The Debian Task Installer
telnet
Preliminary Networking Information
time zone
Task 9: Configuring the
top
top CPU Processes
twm
X Configuration using anXious
tzconfig
Task 9: Configuring the
umask
File Protection by Owner
umount
Mounting and Unmounting File
user accounts
General Configuration
userdel
Removing a user
vertical sync
X Configuration using anXious
vi
vi
Virtual Console
Notes
VMware
CREDITS
whereis
-S | --search <search
who
Who is logged on?
window managers
X Configuration using anXious
X Window System
X Configuration using anXious
xdm
X Configuration using anXious
xf86Setup
X Configuration using anXious
xterm
X Configuration using anXious
zgv
Installing Packages
zImage
Non-Debian Kernel Construction



Dale Scheetz