BUNDLE-UPDATE(1)					      BUNDLE-UPDATE(1)



NAME
       bundle-update - Update your gems to the latest available versions

SYNOPSIS
       bundle  update  *gems  [--all] [--group=NAME] [--source=NAME] [--local]
       [--ruby] [--bundler[=VERSION]] [--full-index]  [--jobs=JOBS]  [--quiet]
       [--force] [--patch|--minor|--major] [--strict] [--conservative]

DESCRIPTION
       Update  the  gems specified (all gems, if --all flag is used), ignoring
       the previously installed gems specified in the  Gemfile.lock.  In  gen-
       eral, you should use bundle install(1) bundle-install.1.html to install
       the same exact gems and versions across machines.

       You would use bundle update to explicitly update the version of a gem.

OPTIONS
       --all  Update all gems specified in Gemfile.

       --group=<name>, -g=[<name>]
	      Only update the gems in the specified group. For	instance,  you
	      can  update all gems in the development group with bundle update
	      --group development. You	can  also  call  bundle  update  rails
	      --group  test  to  update the rails gem and all gems in the test
	      group, for example.

       --source=<name>
	      The name of a :git or :path source used in the  Gemfile(5).  For
	      instance,        with	   a	    :git       source	    of
	      http://github.com/rails/rails.git, you would call bundle	update
	      --source rails

       --local
	      Do  not attempt to fetch gems remotely and use the gem cache in-
	      stead.

       --ruby Update the locked version of Ruby  to  the  current  version  of
	      Ruby.

       --bundler
	      Update the locked version of bundler to the invoked bundler ver-
	      sion.

       --full-index
	      Fall back to using the single-file index of all gems.

       --jobs=[<number>], -j[<number>]
	      Specify the number of jobs to run in parallel. The default is 1.

       --retry=[<number>]
	      Retry failed network or git requests for number times.

       --quiet
	      Only output warnings and errors.

       --force
	      Force downloading every gem. --redownload is an  alias  of  this
	      option.

       --patch
	      Prefer updating only to next patch version.

       --minor
	      Prefer updating only to next minor version.

       --major
	      Prefer updating to next major version (default).

       --strict
	      Do not allow any gem to be updated past latest --patch | --minor
	      | --major.

       --conservative
	      Use bundle install conservative update behavior and do not allow
	      shared dependencies to be updated.

UPDATING ALL GEMS
       If  you run bundle update --all, bundler will ignore any previously in-
       stalled gems and resolve all dependencies again	based  on  the	latest
       versions of all gems available in the sources.

       Consider the following Gemfile(5):


	   source "https://rubygems.org"

	   gem "rails", "3.0.0.rc"
	   gem "nokogiri"



       When  you  run  bundle install(1) bundle-install.1.html the first time,
       bundler will resolve all of the dependencies, all the way down, and in-
       stall what you need:


	   Fetching gem metadata from https://rubygems.org/.........
	   Resolving dependencies...
	   Installing builder 2.1.2
	   Installing abstract 1.0.0
	   Installing rack 1.2.8
	   Using bundler 1.7.6
	   Installing rake 10.4.0
	   Installing polyglot 0.3.5
	   Installing mime-types 1.25.1
	   Installing i18n 0.4.2
	   Installing mini_portile 0.6.1
	   Installing tzinfo 0.3.42
	   Installing rack-mount 0.6.14
	   Installing rack-test 0.5.7
	   Installing treetop 1.4.15
	   Installing thor 0.14.6
	   Installing activesupport 3.0.0.rc
	   Installing erubis 2.6.6
	   Installing activemodel 3.0.0.rc
	   Installing arel 0.4.0
	   Installing mail 2.2.20
	   Installing activeresource 3.0.0.rc
	   Installing actionpack 3.0.0.rc
	   Installing activerecord 3.0.0.rc
	   Installing actionmailer 3.0.0.rc
	   Installing railties 3.0.0.rc
	   Installing rails 3.0.0.rc
	   Installing nokogiri 1.6.5

	   Bundle complete! 2 Gemfile dependencies, 26 gems total.
	   Use `bundle show [gemname]` to see where a bundled gem is installed.



       As  you	can see, even though you have two gems in the Gemfile(5), your
       application needs 26 different gems in order to run. Bundler  remembers
       the  exact versions it installed in Gemfile.lock. The next time you run
       bundle install(1) bundle-install.1.html, bundler skips  the  dependency
       resolution and installs the same gems as it installed last time.

       After  checking in the Gemfile.lock into version control and cloning it
       on another machine,  running  bundle  install(1)  bundle-install.1.html
       will  still  install  the  gems that you installed last time. You don't
       need to worry that a new release of erubis or mail changes the gems you
       use.

       However,  from  time to time, you might want to update the gems you are
       using to the newest versions that still match the  gems	in  your  Gem-
       file(5).

       To  do  this,  run  bundle  update  --all,  which  will ignore the Gem-
       file.lock, and resolve all the dependencies again. Keep	in  mind  that
       this  process  can  result  in  a significantly different set of the 25
       gems, based on the requirements of new gems that the  gem  authors  re-
       leased since the last time you ran bundle update --all.

UPDATING A LIST OF GEMS
       Sometimes, you want to update a single gem in the Gemfile(5), and leave
       the rest of the gems that you specified locked to the versions  in  the
       Gemfile.lock.

       For  instance,  in  the	scenario above, imagine that nokogiri releases
       version 1.4.4, and you want to update it without updating Rails and all
       of its dependencies. To do this, run bundle update nokogiri.

       Bundler	will  update  nokogiri	and any of its dependencies, but leave
       alone Rails and its dependencies.

OVERLAPPING DEPENDENCIES
       Sometimes, multiple gems declared in your Gemfile(5) are  satisfied  by
       the  same  second-level	dependency. For instance, consider the case of
       thin and rack-perftools-profiler.


	   source "https://rubygems.org"

	   gem "thin"
	   gem "rack-perftools-profiler"



       The thin gem depends on rack >= 1.0, while rack-perftools-profiler  de-
       pends on rack ~> 1.0. If you run bundle install, you get:


	   Fetching source index for https://rubygems.org/
	   Installing daemons (1.1.0)
	   Installing eventmachine (0.12.10) with native extensions
	   Installing open4 (1.0.1)
	   Installing perftools.rb (0.4.7) with native extensions
	   Installing rack (1.2.1)
	   Installing rack-perftools_profiler (0.0.2)
	   Installing thin (1.2.7) with native extensions
	   Using bundler (1.0.0.rc.3)



       In this case, the two gems have their own set of dependencies, but they
       share rack in common. If you run bundle update thin, bundler  will  up-
       date  daemons,  eventmachine  and rack, which are dependencies of thin,
       but  not   open4   or   perftools.rb,   which   are   dependencies   of
       rack-perftools_profiler.  Note that bundle update thin will update rack
       even though it's also a dependency of rack-perftools_profiler.

       In short, by default, when  you	update	a  gem	using  bundle  update,
       bundler	will update all dependencies of that gem, including those that
       are also dependencies of another gem.

       To prevent updating shared dependencies, prior to version 1.14 the only
       option  was  the  CONSERVATIVE  UPDATING  behavior in bundle install(1)
       bundle-install.1.html:

       In this scenario, updating the thin version manually in the Gemfile(5),
       and  then running bundle install(1) bundle-install.1.html will only up-
       date daemons and eventmachine, but not rack. For more information,  see
       the    CONSERVATIVE    UPDATING	  section    of    bundle   install(1)
       bundle-install.1.html.

       Starting with 1.14, specifying the --conservative option will also pre-
       vent shared dependencies from being updated.

PATCH LEVEL OPTIONS
       Version	1.14  introduced 4 patch-level options that will influence how
       gem versions are resolved. One of the following options	can  be  used:
       --patch, --minor or --major. --strict can be added to further influence
       resolution.

       --patch
	      Prefer updating only to next patch version.

       --minor
	      Prefer updating only to next minor version.

       --major
	      Prefer updating to next major version (default).

       --strict
	      Do not allow any gem to be updated past latest --patch | --minor
	      | --major.

       When  Bundler is resolving what versions to use to satisfy declared re-
       quirements in the Gemfile or in parent gems, it looks up all  available
       versions,  filters out any versions that don't satisfy the requirement,
       and then, by default, sorts them from  newest  to  oldest,  considering
       them in that order.

       Providing  one  of  the	patch level options (e.g. --patch) changes the
       sort order of the satisfying versions, causing Bundler to consider  the
       latest --patch or --minor version available before other versions. Note
       that versions outside the stated patch level could still be resolved to
       if necessary to find a suitable dependency graph.

       For  example,  if gem 'foo' is locked at 1.0.2, with no gem requirement
       defined in the Gemfile, and versions 1.0.3, 1.0.4, 1.1.0, 1.1.1,  2.0.0
       all exist, the default order of preference by default (--major) will be
       "2.0.0, 1.1.1, 1.1.0, 1.0.4, 1.0.3, 1.0.2".

       If the --patch option is used, the order of preference will  change  to
       "1.0.4, 1.0.3, 1.0.2, 1.1.1, 1.1.0, 2.0.0".

       If  the	--minor option is used, the order of preference will change to
       "1.1.1, 1.1.0, 1.0.4, 1.0.3, 1.0.2, 2.0.0".

       Combining the --strict option with any of the patch level options  will
       remove  any versions beyond the scope of the patch level option, to en-
       sure that no gem is updated that far.

       To continue the previous example, if both --patch and --strict  options
       are used, the available versions for resolution would be "1.0.4, 1.0.3,
       1.0.2". If --minor and --strict are used, it would  be  "1.1.1,	1.1.0,
       1.0.4, 1.0.3, 1.0.2".

       Gem  requirements as defined in the Gemfile will still be the first de-
       termining factor for what versions are available. If the  gem  require-
       ment  for foo in the Gemfile is '~> 1.0', that will accomplish the same
       thing as providing the --minor and --strict options.

PATCH LEVEL EXAMPLES
       Given the following gem specifications:


	   foo 1.4.3, requires: ~> bar 2.0
	   foo 1.4.4, requires: ~> bar 2.0
	   foo 1.4.5, requires: ~> bar 2.1
	   foo 1.5.0, requires: ~> bar 2.1
	   foo 1.5.1, requires: ~> bar 3.0
	   bar with versions 2.0.3, 2.0.4, 2.1.0, 2.1.1, 3.0.0



       Gemfile:


	   gem 'foo'



       Gemfile.lock:


	   foo (1.4.3)
	     bar (~> 2.0)
	   bar (2.0.3)



       Cases:


	   #  Command Line		       Result
	   ------------------------------------------------------------
	   1  bundle update --patch	       'foo 1.4.5', 'bar 2.1.1'
	   2  bundle update --patch foo        'foo 1.4.5', 'bar 2.1.1'
	   3  bundle update --minor	       'foo 1.5.1', 'bar 3.0.0'
	   4  bundle update --minor --strict   'foo 1.5.0', 'bar 2.1.1'
	   5  bundle update --patch --strict   'foo 1.4.4', 'bar 2.0.4'



       In case 1, bar is upgraded to 2.1.1, a minor version increase,  because
       the dependency from foo 1.4.5 required it.

       In  case  2,  only foo is requested to be unlocked, but bar is also al-
       lowed to move because it's not a declared dependency in the Gemfile.

       In case 3, bar goes up a whole major release, because a minor  increase
       is  preferred now for foo, and when it goes to 1.5.1, it requires 3.0.0
       of bar.

       In case 4, foo is preferred up to a minor version, but 1.5.1 won't work
       because	the  --strict  flag removes bar 3.0.0 from consideration since
       it's a major increment.

       In case 5, both foo and bar have any minor or major increments  removed
       from  consideration  because of the --strict flag, so the most they can
       move is up to 1.4.4 and 2.0.4.

RECOMMENDED WORKFLOW
       In general, when working with an application managed with bundler,  you
       should use the following workflow:

       O   After you create your Gemfile(5) for the first time, run

	   $ bundle install

       O   Check the resulting Gemfile.lock into version control

	   $ git add Gemfile.lock

       O   When  checking  out this repository on another development machine,
	   run

	   $ bundle install

       O   When checking out this repository on a deployment machine, run

	   $ bundle install --deployment

       O   After changing the Gemfile(5) to reflect a  new  or	update	depen-
	   dency, run

	   $ bundle install

       O   Make sure to check the updated Gemfile.lock into version control

	   $ git add Gemfile.lock

       O   If bundle install(1) bundle-install.1.html reports a conflict, man-
	   ually update the specific gems that you changed in the Gemfile(5)

	   $ bundle update rails thin

       O   If you want to update all the gems to the latest possible  versions
	   that still match the gems listed in the Gemfile(5), run

	   $ bundle update --all






				   May 2020		      BUNDLE-UPDATE(1)
