btPolyhedralConvexShape.cpp

Go to the documentation of this file.

/*
Bullet Continuous Collision Detection and Physics Library
Copyright (c) 2003-2009 Erwin Coumans  http://bulletphysics.org

This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, 
including commercial applications, and to alter it and redistribute it freely, 
subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
*/
#if defined (_WIN32) || defined (__i386__)
#define BT_USE_SSE_IN_API
#endif

#include "BulletCollision/CollisionShapes/btPolyhedralConvexShape.h"
#include "btConvexPolyhedron.h"
#include "LinearMath/btConvexHullComputer.h"
#include <new>
#include "LinearMath/btGeometryUtil.h"
#include "LinearMath/btGrahamScan2dConvexHull.h"


btPolyhedralConvexShape::btPolyhedralConvexShape() :btConvexInternalShape(),
m_polyhedron(0)
{

}

btPolyhedralConvexShape::~btPolyhedralConvexShape()
{
        if (m_polyhedron)
        {
                m_polyhedron->~btConvexPolyhedron();
                btAlignedFree(m_polyhedron);
        }
}


bool    btPolyhedralConvexShape::initializePolyhedralFeatures(int shiftVerticesByMargin)
{

        if (m_polyhedron)
        {
                m_polyhedron->~btConvexPolyhedron();
                btAlignedFree(m_polyhedron);
        }
        
        void* mem = btAlignedAlloc(sizeof(btConvexPolyhedron),16);
        m_polyhedron = new (mem) btConvexPolyhedron;

        btAlignedObjectArray<btVector3> orgVertices;

        for (int i=0;i<getNumVertices();i++)
        {
                btVector3& newVertex = orgVertices.expand();
                getVertex(i,newVertex);
        }
        
        btConvexHullComputer conv;
        
        if (shiftVerticesByMargin)
        {
                btAlignedObjectArray<btVector3> planeEquations;
                btGeometryUtil::getPlaneEquationsFromVertices(orgVertices,planeEquations);

                btAlignedObjectArray<btVector3> shiftedPlaneEquations;
                for (int p=0;p<planeEquations.size();p++)
                {
                           btVector3 plane = planeEquations[p];
                //         btScalar margin = getMargin();
                           plane[3] -= getMargin();
                           shiftedPlaneEquations.push_back(plane);
                }

                btAlignedObjectArray<btVector3> tmpVertices;

                btGeometryUtil::getVerticesFromPlaneEquations(shiftedPlaneEquations,tmpVertices);
        
                conv.compute(&tmpVertices[0].getX(), sizeof(btVector3),tmpVertices.size(),0.f,0.f);
        } else
        {
                
                conv.compute(&orgVertices[0].getX(), sizeof(btVector3),orgVertices.size(),0.f,0.f);
        }



        btAlignedObjectArray<btVector3> faceNormals;
        int numFaces = conv.faces.size();
        faceNormals.resize(numFaces);
        btConvexHullComputer* convexUtil = &conv;

        
        btAlignedObjectArray<btFace>    tmpFaces;
        tmpFaces.resize(numFaces);

        int numVertices = convexUtil->vertices.size();
        m_polyhedron->m_vertices.resize(numVertices);
        for (int p=0;p<numVertices;p++)
        {
                m_polyhedron->m_vertices[p] = convexUtil->vertices[p];
        }


        for (int i=0;i<numFaces;i++)
        {
                int face = convexUtil->faces[i];
                //printf("face=%d\n",face);
                const btConvexHullComputer::Edge*  firstEdge = &convexUtil->edges[face];
                const btConvexHullComputer::Edge*  edge = firstEdge;

                btVector3 edges[3];
                int numEdges = 0;
                //compute face normals

                do
                {
                        
                        int src = edge->getSourceVertex();
                        tmpFaces[i].m_indices.push_back(src);
                        int targ = edge->getTargetVertex();
                        btVector3 wa = convexUtil->vertices[src];

                        btVector3 wb = convexUtil->vertices[targ];
                        btVector3 newEdge = wb-wa;
                        newEdge.normalize();
                        if (numEdges<2)
                                edges[numEdges++] = newEdge;

                        edge = edge->getNextEdgeOfFace();
                } while (edge!=firstEdge);

                btScalar planeEq = 1e30f;

                
                if (numEdges==2)
                {
                        faceNormals[i] = edges[0].cross(edges[1]);
                        faceNormals[i].normalize();
                        tmpFaces[i].m_plane[0] = faceNormals[i].getX();
                        tmpFaces[i].m_plane[1] = faceNormals[i].getY();
                        tmpFaces[i].m_plane[2] = faceNormals[i].getZ();
                        tmpFaces[i].m_plane[3] = planeEq;

                }
                else
                {
                        btAssert(0);//degenerate?
                        faceNormals[i].setZero();
                }

                for (int v=0;v<tmpFaces[i].m_indices.size();v++)
                {
                        btScalar eq = m_polyhedron->m_vertices[tmpFaces[i].m_indices[v]].dot(faceNormals[i]);
                        if (planeEq>eq)
                        {
                                planeEq=eq;
                        }
                }
                tmpFaces[i].m_plane[3] = -planeEq;
        }

        //merge coplanar faces and copy them to m_polyhedron

        btScalar faceWeldThreshold= 0.999f;
        btAlignedObjectArray<int> todoFaces;
        for (int i=0;i<tmpFaces.size();i++)
                todoFaces.push_back(i);

        while (todoFaces.size())
        {
                btAlignedObjectArray<int> coplanarFaceGroup;
                int refFace = todoFaces[todoFaces.size()-1];

                coplanarFaceGroup.push_back(refFace);
                btFace& faceA = tmpFaces[refFace];
                todoFaces.pop_back();

                btVector3 faceNormalA(faceA.m_plane[0],faceA.m_plane[1],faceA.m_plane[2]);
                for (int j=todoFaces.size()-1;j>=0;j--)
                {
                        int i = todoFaces[j];
                        btFace& faceB = tmpFaces[i];
                        btVector3 faceNormalB(faceB.m_plane[0],faceB.m_plane[1],faceB.m_plane[2]);
                        if (faceNormalA.dot(faceNormalB)>faceWeldThreshold)
                        {
                                coplanarFaceGroup.push_back(i);
                                todoFaces.remove(i);
                        }
                }


                bool did_merge = false;
                if (coplanarFaceGroup.size()>1)
                {
                        //do the merge: use Graham Scan 2d convex hull

                        btAlignedObjectArray<GrahamVector3> orgpoints;
                        btVector3 averageFaceNormal(0,0,0);

                        for (int i=0;i<coplanarFaceGroup.size();i++)
                        {
//                              m_polyhedron->m_faces.push_back(tmpFaces[coplanarFaceGroup[i]]);

                                btFace& face = tmpFaces[coplanarFaceGroup[i]];
                                btVector3 faceNormal(face.m_plane[0],face.m_plane[1],face.m_plane[2]);
                                averageFaceNormal+=faceNormal;
                                for (int f=0;f<face.m_indices.size();f++)
                                {
                                        int orgIndex = face.m_indices[f];
                                        btVector3 pt = m_polyhedron->m_vertices[orgIndex];
                                        
                                        bool found = false;

                                        for (int i=0;i<orgpoints.size();i++)
                                        {
                                                //if ((orgpoints[i].m_orgIndex == orgIndex) || ((rotatedPt-orgpoints[i]).length2()<0.0001))
                                                if (orgpoints[i].m_orgIndex == orgIndex)
                                                {
                                                        found=true;
                                                        break;
                                                }
                                        }
                                        if (!found)
                                                orgpoints.push_back(GrahamVector3(pt,orgIndex));
                                }
                        }

                        

                        btFace combinedFace;
                        for (int i=0;i<4;i++)
                                combinedFace.m_plane[i] = tmpFaces[coplanarFaceGroup[0]].m_plane[i];

                        btAlignedObjectArray<GrahamVector3> hull;

                        averageFaceNormal.normalize();
                        GrahamScanConvexHull2D(orgpoints,hull,averageFaceNormal);

                        for (int i=0;i<hull.size();i++)
                        {
                                combinedFace.m_indices.push_back(hull[i].m_orgIndex);
                                for(int k = 0; k < orgpoints.size(); k++) 
                                {
                                        if(orgpoints[k].m_orgIndex == hull[i].m_orgIndex) 
                                        {
                                                orgpoints[k].m_orgIndex = -1; // invalidate...
                                                break;
                                        }
                                }
                        }

                        // are there rejected vertices?
                        bool reject_merge = false;
                        


                        for(int i = 0; i < orgpoints.size(); i++) {
                                if(orgpoints[i].m_orgIndex == -1)
                                        continue; // this is in the hull...
                                // this vertex is rejected -- is anybody else using this vertex?
                                for(int j = 0; j < tmpFaces.size(); j++) {
                                        
                                        btFace& face = tmpFaces[j];
                                        // is this a face of the current coplanar group?
                                        bool is_in_current_group = false;
                                        for(int k = 0; k < coplanarFaceGroup.size(); k++) {
                                                if(coplanarFaceGroup[k] == j) {
                                                        is_in_current_group = true;
                                                        break;
                                                }
                                        }
                                        if(is_in_current_group) // ignore this face...
                                                continue;
                                        // does this face use this rejected vertex?
                                        for(int v = 0; v < face.m_indices.size(); v++) {
                                                if(face.m_indices[v] == orgpoints[i].m_orgIndex) {
                                                        // this rejected vertex is used in another face -- reject merge
                                                        reject_merge = true;
                                                        break;
                                                }
                                        }
                                        if(reject_merge)
                                                break;
                                }
                                if(reject_merge)
                                        break;
                        }

                        if (!reject_merge)
                        {
                                // do this merge!
                                did_merge = true;
                                m_polyhedron->m_faces.push_back(combinedFace);
                        }
                }
                if(!did_merge)
                {
                        for (int i=0;i<coplanarFaceGroup.size();i++)
                        {
                                btFace face = tmpFaces[coplanarFaceGroup[i]];
                                m_polyhedron->m_faces.push_back(face);
                        }

                } 



        }
        
        m_polyhedron->initialize();

        return true;
}

#ifndef MIN
    #define MIN(_a, _b)     ((_a) < (_b) ? (_a) : (_b))
#endif

btVector3       btPolyhedralConvexShape::localGetSupportingVertexWithoutMargin(const btVector3& vec0)const
{


        btVector3 supVec(0,0,0);
#ifndef __SPU__
        int i;
        btScalar maxDot(btScalar(-BT_LARGE_FLOAT));

        btVector3 vec = vec0;
        btScalar lenSqr = vec.length2();
        if (lenSqr < btScalar(0.0001))
        {
                vec.setValue(1,0,0);
        } else
        {
                btScalar rlen = btScalar(1.) / btSqrt(lenSqr );
                vec *= rlen;
        }

        btVector3 vtx;
        btScalar newDot;

    for( int k = 0; k < getNumVertices(); k += 128 )
    {
        btVector3 temp[128];
        int inner_count = MIN(getNumVertices() - k, 128);
        for( i = 0; i < inner_count; i++ )
            getVertex(i,temp[i]); 
        i = (int) vec.maxDot( temp, inner_count, newDot);
                if (newDot > maxDot)
                {
                        maxDot = newDot;
                        supVec = temp[i];
                }        
    }
        
#endif //__SPU__
        return supVec;
}



void    btPolyhedralConvexShape::batchedUnitVectorGetSupportingVertexWithoutMargin(const btVector3* vectors,btVector3* supportVerticesOut,int numVectors) const
{
#ifndef __SPU__
        int i;

        btVector3 vtx;
        btScalar newDot;

        for (i=0;i<numVectors;i++)
        {
                supportVerticesOut[i][3] = btScalar(-BT_LARGE_FLOAT);
        }

        for (int j=0;j<numVectors;j++)
        {
        const btVector3& vec = vectors[j];
        
        for( int k = 0; k < getNumVertices(); k += 128 )
        {
            btVector3 temp[128];
            int inner_count = MIN(getNumVertices() - k, 128);
            for( i = 0; i < inner_count; i++ )
                getVertex(i,temp[i]); 
            i = (int) vec.maxDot( temp, inner_count, newDot);
            if (newDot > supportVerticesOut[j][3])
            {
                                supportVerticesOut[j] = temp[i];
                                supportVerticesOut[j][3] = newDot;
            }        
        }
    }

#endif //__SPU__
}



void    btPolyhedralConvexShape::calculateLocalInertia(btScalar mass,btVector3& inertia) const
{
#ifndef __SPU__
        //not yet, return box inertia

        btScalar margin = getMargin();

        btTransform ident;
        ident.setIdentity();
        btVector3 aabbMin,aabbMax;
        getAabb(ident,aabbMin,aabbMax);
        btVector3 halfExtents = (aabbMax-aabbMin)*btScalar(0.5);

        btScalar lx=btScalar(2.)*(halfExtents.x()+margin);
        btScalar ly=btScalar(2.)*(halfExtents.y()+margin);
        btScalar lz=btScalar(2.)*(halfExtents.z()+margin);
        const btScalar x2 = lx*lx;
        const btScalar y2 = ly*ly;
        const btScalar z2 = lz*lz;
        const btScalar scaledmass = mass * btScalar(0.08333333);

        inertia = scaledmass * (btVector3(y2+z2,x2+z2,x2+y2));
#endif //__SPU__
}



void    btPolyhedralConvexAabbCachingShape::setLocalScaling(const btVector3& scaling)
{
        btConvexInternalShape::setLocalScaling(scaling);
        recalcLocalAabb();
}

btPolyhedralConvexAabbCachingShape::btPolyhedralConvexAabbCachingShape()
:btPolyhedralConvexShape(),
m_localAabbMin(1,1,1),
m_localAabbMax(-1,-1,-1),
m_isLocalAabbValid(false)
{
}

void btPolyhedralConvexAabbCachingShape::getAabb(const btTransform& trans,btVector3& aabbMin,btVector3& aabbMax) const
{
        getNonvirtualAabb(trans,aabbMin,aabbMax,getMargin());
}

void    btPolyhedralConvexAabbCachingShape::recalcLocalAabb()
{
        m_isLocalAabbValid = true;
        
        #if 1
        static const btVector3 _directions[] =
        {
                btVector3( 1.,  0.,  0.),
                btVector3( 0.,  1.,  0.),
                btVector3( 0.,  0.,  1.),
                btVector3( -1., 0.,  0.),
                btVector3( 0., -1.,  0.),
                btVector3( 0.,  0., -1.)
        };
        
        btVector3 _supporting[] =
        {
                btVector3( 0., 0., 0.),
                btVector3( 0., 0., 0.),
                btVector3( 0., 0., 0.),
                btVector3( 0., 0., 0.),
                btVector3( 0., 0., 0.),
                btVector3( 0., 0., 0.)
        };
        
        batchedUnitVectorGetSupportingVertexWithoutMargin(_directions, _supporting, 6);
        
        for ( int i = 0; i < 3; ++i )
        {
                m_localAabbMax[i] = _supporting[i][i] + m_collisionMargin;
                m_localAabbMin[i] = _supporting[i + 3][i] - m_collisionMargin;
        }
        
        #else

        for (int i=0;i<3;i++)
        {
                btVector3 vec(btScalar(0.),btScalar(0.),btScalar(0.));
                vec[i] = btScalar(1.);
                btVector3 tmp = localGetSupportingVertex(vec);
                m_localAabbMax[i] = tmp[i];
                vec[i] = btScalar(-1.);
                tmp = localGetSupportingVertex(vec);
                m_localAabbMin[i] = tmp[i];
        }
        #endif
}