vtkGeoSphereTransform - A transformation between long-lat-alt and rect coords More...

Inheritance diagram for Kitware.VTK.vtkGeoSphereTransform:

Collaboration diagram for Kitware.VTK.vtkGeoSphereTransform:

Public Member Functions
	vtkGeoSphereTransform (IntPtr rawCppThis, bool callDisposalMethod, bool strong)
	Automatically generated constructor - called from generated code. DO NOT call directly.
	vtkGeoSphereTransform ()
	Undocumented Block.
virtual double	GetBaseAltitude ()
	The base altitude to transform coordinates to. This can be useful for transforming lines just above the earth's surface. Default is 0.
virtual bool	GetToRectangular ()
	If on, this transform converts (long,lat,alt) triples to (x,y,z) as an offset from the center of the earth. Alt, x, y, and z are all be in meters. If off, the tranform works in the reverse direction. Initial value is on.
override void	InternalTransformPoint (IntPtr arg0, IntPtr arg1)
	This will calculate the transformation without calling Update. Meant for use only within other VTK classes.
override void	Inverse ()
	Invert the transformation.
override int	IsA (string type)
	Undocumented Block.
override vtkAbstractTransform	MakeTransform ()
	Make another transform of the same type.
new vtkGeoSphereTransform	NewInstance ()
	Undocumented Block.
virtual void	SetBaseAltitude (double _arg)
	The base altitude to transform coordinates to. This can be useful for transforming lines just above the earth's surface. Default is 0.
virtual void	SetToRectangular (bool _arg)
	If on, this transform converts (long,lat,alt) triples to (x,y,z) as an offset from the center of the earth. Alt, x, y, and z are all be in meters. If off, the tranform works in the reverse direction. Initial value is on.
virtual void	ToRectangularOff ()
	If on, this transform converts (long,lat,alt) triples to (x,y,z) as an offset from the center of the earth. Alt, x, y, and z are all be in meters. If off, the tranform works in the reverse direction. Initial value is on.
virtual void	ToRectangularOn ()
	If on, this transform converts (long,lat,alt) triples to (x,y,z) as an offset from the center of the earth. Alt, x, y, and z are all be in meters. If off, the tranform works in the reverse direction. Initial value is on.
Static Public Member Functions
static new vtkGeoSphereTransform	New ()
	Undocumented Block.
static new int	IsTypeOf (string type)
	Undocumented Block.
static new vtkGeoSphereTransform	SafeDownCast (vtkObjectBase o)
	Undocumented Block.
Public Attributes
new const string	MRFullTypeName = "Kitware.VTK.vtkGeoSphereTransform"
	Automatically generated type registration mechanics.
Static Public Attributes
static new readonly string	MRClassNameKey = "21vtkGeoSphereTransform"
	Automatically generated type registration mechanics.
Protected Member Functions
override void	Dispose (bool disposing)
	Automatically generated protected Dispose method - called from public Dispose or the C# destructor. DO NOT call directly.
Private Member Functions
static internal IntPtr	vtkGeoSphereTransform_New (ref uint mteStatus, ref uint mteIndex, ref uint rawRefCount)
static internal double	vtkGeoSphereTransform_GetBaseAltitude_01 (HandleRef pThis)
static internal byte	vtkGeoSphereTransform_GetToRectangular_02 (HandleRef pThis)
static internal void	vtkGeoSphereTransform_InternalTransformPoint_03 (HandleRef pThis, IntPtr arg0, IntPtr arg1)
static internal void	vtkGeoSphereTransform_Inverse_04 (HandleRef pThis)
static internal int	vtkGeoSphereTransform_IsA_05 (HandleRef pThis, string type)
static internal int	vtkGeoSphereTransform_IsTypeOf_06 (string type)
static internal IntPtr	vtkGeoSphereTransform_MakeTransform_07 (HandleRef pThis, ref uint mteStatus, ref uint mteIndex, ref uint rawRefCount)
static internal IntPtr	vtkGeoSphereTransform_NewInstance_09 (HandleRef pThis, ref uint mteStatus, ref uint mteIndex, ref uint rawRefCount)
static internal IntPtr	vtkGeoSphereTransform_SafeDownCast_10 (HandleRef o, ref uint mteStatus, ref uint mteIndex, ref uint rawRefCount)
static internal void	vtkGeoSphereTransform_SetBaseAltitude_11 (HandleRef pThis, double _arg)
static internal void	vtkGeoSphereTransform_SetToRectangular_12 (HandleRef pThis, byte _arg)
static internal void	vtkGeoSphereTransform_ToRectangularOff_13 (HandleRef pThis)
static internal void	vtkGeoSphereTransform_ToRectangularOn_14 (HandleRef pThis)
Static Private Member Functions
static	vtkGeoSphereTransform ()
	Automatically generated type registration mechanics.

Detailed Description

vtkGeoSphereTransform - A transformation between long-lat-alt and rect coords

Description the cartesian coordinate system is the following (if BaseAltitude is 0),

the origin is at the center of the earth
the x axis goes from the origin to (longtitude=-90,latitude=0), intersection of equator and the meridian passing just east of Galapagos Islands
the y axis goes from the origin to the intersection of Greenwitch meridian and equator (longitude=0,latitude=0)
the z axis goes from the origin to the Geographic North Pole (latitude=90)
therefore the frame is right-handed.

Constructor & Destructor Documentation

static Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform ( ) [static, private]

Automatically generated type registration mechanics.

Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform	(	IntPtr	rawCppThis,
		bool	callDisposalMethod,
		bool	strong
	)

Automatically generated constructor - called from generated code. DO NOT call directly.

Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform ( )

Undocumented Block.

Member Function Documentation

override void Kitware.VTK.vtkGeoSphereTransform.Dispose ( bool disposing ) [protected]

Automatically generated protected Dispose method - called from public Dispose or the C# destructor. DO NOT call directly.

Reimplemented from Kitware.VTK.vtkAbstractTransform.

virtual double Kitware.VTK.vtkGeoSphereTransform.GetBaseAltitude ( ) [virtual]

The base altitude to transform coordinates to. This can be useful for transforming lines just above the earth's surface. Default is 0.

virtual bool Kitware.VTK.vtkGeoSphereTransform.GetToRectangular ( ) [virtual]

If on, this transform converts (long,lat,alt) triples to (x,y,z) as an offset from the center of the earth. Alt, x, y, and z are all be in meters. If off, the tranform works in the reverse direction. Initial value is on.

override void Kitware.VTK.vtkGeoSphereTransform.InternalTransformPoint	(	IntPtr	arg0,
		IntPtr	arg1
	)		`[virtual]`

This will calculate the transformation without calling Update. Meant for use only within other VTK classes.

Reimplemented from Kitware.VTK.vtkAbstractTransform.

override void Kitware.VTK.vtkGeoSphereTransform.Inverse ( ) [virtual]

Invert the transformation.

Reimplemented from Kitware.VTK.vtkAbstractTransform.

override int Kitware.VTK.vtkGeoSphereTransform.IsA ( string type ) [virtual]

Undocumented Block.

Reimplemented from Kitware.VTK.vtkAbstractTransform.

static new int Kitware.VTK.vtkGeoSphereTransform.IsTypeOf ( string type ) [static]

Undocumented Block.

Reimplemented from Kitware.VTK.vtkAbstractTransform.

override vtkAbstractTransform Kitware.VTK.vtkGeoSphereTransform.MakeTransform ( ) [virtual]

Make another transform of the same type.

Reimplemented from Kitware.VTK.vtkAbstractTransform.

static new vtkGeoSphereTransform Kitware.VTK.vtkGeoSphereTransform.New ( ) [static]

Undocumented Block.

Reimplemented from Kitware.VTK.vtkObject.

new vtkGeoSphereTransform Kitware.VTK.vtkGeoSphereTransform.NewInstance ( )

Undocumented Block.

Reimplemented from Kitware.VTK.vtkAbstractTransform.

static new vtkGeoSphereTransform Kitware.VTK.vtkGeoSphereTransform.SafeDownCast ( vtkObjectBase o ) [static]

Undocumented Block.

Reimplemented from Kitware.VTK.vtkAbstractTransform.

Here is the call graph for this function:

virtual void Kitware.VTK.vtkGeoSphereTransform.SetBaseAltitude ( double _arg ) [virtual]

The base altitude to transform coordinates to. This can be useful for transforming lines just above the earth's surface. Default is 0.

virtual void Kitware.VTK.vtkGeoSphereTransform.SetToRectangular ( bool _arg ) [virtual]

If on, this transform converts (long,lat,alt) triples to (x,y,z) as an offset from the center of the earth. Alt, x, y, and z are all be in meters. If off, the tranform works in the reverse direction. Initial value is on.

virtual void Kitware.VTK.vtkGeoSphereTransform.ToRectangularOff ( ) [virtual]

If on, this transform converts (long,lat,alt) triples to (x,y,z) as an offset from the center of the earth. Alt, x, y, and z are all be in meters. If off, the tranform works in the reverse direction. Initial value is on.

virtual void Kitware.VTK.vtkGeoSphereTransform.ToRectangularOn ( ) [virtual]

If on, this transform converts (long,lat,alt) triples to (x,y,z) as an offset from the center of the earth. Alt, x, y, and z are all be in meters. If off, the tranform works in the reverse direction. Initial value is on.

static internal double Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform_GetBaseAltitude_01 ( HandleRef pThis ) [private]

static internal byte Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform_GetToRectangular_02 ( HandleRef pThis ) [private]

static internal void Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform_InternalTransformPoint_03	(	HandleRef	pThis,
		IntPtr	arg0,
		IntPtr	arg1
	)		`[private]`

static internal void Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform_Inverse_04 ( HandleRef pThis ) [private]

static internal int Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform_IsA_05	(	HandleRef	pThis,
		string	type
	)		`[private]`

static internal int Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform_IsTypeOf_06 ( string type ) [private]

static internal IntPtr Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform_MakeTransform_07	(	HandleRef	pThis,
		ref uint	mteStatus,
		ref uint	mteIndex,
		ref uint	rawRefCount
	)		`[private]`

static internal IntPtr Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform_New	(	ref uint	mteStatus,
		ref uint	mteIndex,
		ref uint	rawRefCount
	)		`[private]`

static internal IntPtr Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform_NewInstance_09	(	HandleRef	pThis,
		ref uint	mteStatus,
		ref uint	mteIndex,
		ref uint	rawRefCount
	)		`[private]`

static internal IntPtr Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform_SafeDownCast_10	(	HandleRef	o,
		ref uint	mteStatus,
		ref uint	mteIndex,
		ref uint	rawRefCount
	)		`[private]`

static internal void Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform_SetBaseAltitude_11	(	HandleRef	pThis,
		double	_arg
	)		`[private]`

static internal void Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform_SetToRectangular_12	(	HandleRef	pThis,
		byte	_arg
	)		`[private]`

static internal void Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform_ToRectangularOff_13 ( HandleRef pThis ) [private]

static internal void Kitware.VTK.vtkGeoSphereTransform.vtkGeoSphereTransform_ToRectangularOn_14 ( HandleRef pThis ) [private]

Member Data Documentation

new readonly string Kitware.VTK.vtkGeoSphereTransform.MRClassNameKey = "21vtkGeoSphereTransform" [static]

Automatically generated type registration mechanics.

Reimplemented from Kitware.VTK.vtkAbstractTransform.

new const string Kitware.VTK.vtkGeoSphereTransform.MRFullTypeName = "Kitware.VTK.vtkGeoSphereTransform"

Automatically generated type registration mechanics.

Reimplemented from Kitware.VTK.vtkAbstractTransform.

The documentation for this class was generated from the following file:

csharp/vtkGeoSphereTransform.cs

Public Member Functions

Static Public Member Functions

Public Attributes

Static Public Attributes

Protected Member Functions

Private Member Functions

Static Private Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation