vtkGeoCamera - Geo interface to a camera. More...

Inheritance diagram for Kitware.VTK.vtkGeoCamera:

Collaboration diagram for Kitware.VTK.vtkGeoCamera:

Public Member Functions
	vtkGeoCamera (IntPtr rawCppThis, bool callDisposalMethod, bool strong)
	Automatically generated constructor - called from generated code. DO NOT call directly.
	vtkGeoCamera ()
	Undocumented Block.
virtual double	GetDistance ()
	Distance is in Meters Relative to Longitude and Latitude. above sea level ???? should we make this from center of earth ???? ???? what about equatorial bulge ????
virtual double	GetHeading ()
	Heading is in degrees: (-180->180) Relative to Logitude and Latitude. 0 is north. 90 is east. ???? what is the standard ???? 180 is south.
virtual double	GetLatitude ()
	Latitude is in degrees: (-90->90) Relative to Longitude. Rotate Latitude around x axis by Latitude,.
virtual bool	GetLockHeading ()
	Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes.
virtual double	GetLongitude ()
	Longitude is in degrees: (-180->180) Relative to absolute coordinates. Rotate Longitude around z axis (earth axis),.
double	GetNodeCoverage (vtkGeoTerrainNode node)
	This method estimates how much of the view is covered by the sphere. Returns a value from 0 to 1.
virtual double[]	GetOrigin ()
	Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points.
virtual void	GetOrigin (ref double _arg1, ref double _arg2, ref double _arg3)
	Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points.
virtual void	GetOrigin (IntPtr _arg)
	Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points.
virtual double	GetOriginLatitude ()
	This point is shifted to 0,0,0 to avoid openGL issues.
virtual double	GetOriginLongitude ()
	This point is shifted to 0,0,0 to avoid openGL issues.
virtual double[]	GetPosition ()
	Get the world position without the origin shift.
virtual void	GetPosition (ref double _arg1, ref double _arg2, ref double _arg3)
	Get the world position without the origin shift.
virtual void	GetPosition (IntPtr _arg)
	Get the world position without the origin shift.
virtual double	GetTilt ()
	Tilt is also know as pitch. Tilt is in degrees: (0->90) Relative to Longitude, Latitude, and Heading. Rotate Tilt around x axis,.
vtkCamera	GetVTKCamera ()
	This vtk camera is updated to match this geo cameras state. It should be treated as a const and should not be modified.
void	InitializeNodeAnalysis (IntPtr rendererSize)
	We precompute some values to speed up update of the terrain. Unfortunately, they have to be manually/explicitly updated when the camera or renderer size changes.
override int	IsA (string type)
	Undocumented Block.
virtual void	LockHeadingOff ()
	Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes.
virtual void	LockHeadingOn ()
	Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes.
new vtkGeoCamera	NewInstance ()
	Undocumented Block.
void	SetDistance (double Distance)
	Distance is in Meters Relative to Longitude and Latitude. above sea level ???? should we make this from center of earth ???? ???? what about equatorial bulge ????
void	SetHeading (double heading)
	Heading is in degrees: (-180->180) Relative to Logitude and Latitude. 0 is north. 90 is east. ???? what is the standard ???? 180 is south.
void	SetLatitude (double latitude)
	Latitude is in degrees: (-90->90) Relative to Longitude. Rotate Latitude around x axis by Latitude,.
virtual void	SetLockHeading (bool _arg)
	Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes.
void	SetLongitude (double longitude)
	Longitude is in degrees: (-180->180) Relative to absolute coordinates. Rotate Longitude around z axis (earth axis),.
void	SetOrigin (double ox, double oy, double oz)
	Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points.
void	SetOriginLatitude (double oLat)
	This point is shifted to 0,0,0 to avoid openGL issues.
void	SetOriginLongitude (double oLat)
	This point is shifted to 0,0,0 to avoid openGL issues.
void	SetTilt (double tilt)
	Tilt is also know as pitch. Tilt is in degrees: (0->90) Relative to Longitude, Latitude, and Heading. Rotate Tilt around x axis,.
Static Public Member Functions
static new vtkGeoCamera	New ()
	Undocumented Block.
static new int	IsTypeOf (string type)
	Undocumented Block.
static new vtkGeoCamera	SafeDownCast (vtkObjectBase o)
	Undocumented Block.
Public Attributes
new const string	MRFullTypeName = "Kitware.VTK.vtkGeoCamera"
	Automatically generated type registration mechanics.
Static Public Attributes
static new readonly string	MRClassNameKey = "12vtkGeoCamera"
	Automatically generated type registration mechanics.
Protected Member Functions
override void	Dispose (bool disposing)
	Automatically generated protected Dispose method - called from public Dispose or the C# destructor. DO NOT call directly.
Private Member Functions
static internal IntPtr	vtkGeoCamera_New (ref uint mteStatus, ref uint mteIndex, ref uint rawRefCount)
static internal double	vtkGeoCamera_GetDistance_01 (HandleRef pThis)
static internal double	vtkGeoCamera_GetHeading_02 (HandleRef pThis)
static internal double	vtkGeoCamera_GetLatitude_03 (HandleRef pThis)
static internal byte	vtkGeoCamera_GetLockHeading_04 (HandleRef pThis)
static internal double	vtkGeoCamera_GetLongitude_05 (HandleRef pThis)
static internal double	vtkGeoCamera_GetNodeCoverage_06 (HandleRef pThis, HandleRef node)
static internal IntPtr	vtkGeoCamera_GetOrigin_07 (HandleRef pThis)
static internal void	vtkGeoCamera_GetOrigin_08 (HandleRef pThis, ref double _arg1, ref double _arg2, ref double _arg3)
static internal void	vtkGeoCamera_GetOrigin_09 (HandleRef pThis, IntPtr _arg)
static internal double	vtkGeoCamera_GetOriginLatitude_10 (HandleRef pThis)
static internal double	vtkGeoCamera_GetOriginLongitude_11 (HandleRef pThis)
static internal IntPtr	vtkGeoCamera_GetPosition_12 (HandleRef pThis)
static internal void	vtkGeoCamera_GetPosition_13 (HandleRef pThis, ref double _arg1, ref double _arg2, ref double _arg3)
static internal void	vtkGeoCamera_GetPosition_14 (HandleRef pThis, IntPtr _arg)
static internal double	vtkGeoCamera_GetTilt_15 (HandleRef pThis)
static internal IntPtr	vtkGeoCamera_GetVTKCamera_16 (HandleRef pThis, ref uint mteStatus, ref uint mteIndex, ref uint rawRefCount)
static internal void	vtkGeoCamera_InitializeNodeAnalysis_17 (HandleRef pThis, IntPtr rendererSize)
static internal int	vtkGeoCamera_IsA_18 (HandleRef pThis, string type)
static internal int	vtkGeoCamera_IsTypeOf_19 (string type)
static internal void	vtkGeoCamera_LockHeadingOff_20 (HandleRef pThis)
static internal void	vtkGeoCamera_LockHeadingOn_21 (HandleRef pThis)
static internal IntPtr	vtkGeoCamera_NewInstance_23 (HandleRef pThis, ref uint mteStatus, ref uint mteIndex, ref uint rawRefCount)
static internal IntPtr	vtkGeoCamera_SafeDownCast_24 (HandleRef o, ref uint mteStatus, ref uint mteIndex, ref uint rawRefCount)
static internal void	vtkGeoCamera_SetDistance_25 (HandleRef pThis, double Distance)
static internal void	vtkGeoCamera_SetHeading_26 (HandleRef pThis, double heading)
static internal void	vtkGeoCamera_SetLatitude_27 (HandleRef pThis, double latitude)
static internal void	vtkGeoCamera_SetLockHeading_28 (HandleRef pThis, byte _arg)
static internal void	vtkGeoCamera_SetLongitude_29 (HandleRef pThis, double longitude)
static internal void	vtkGeoCamera_SetOrigin_30 (HandleRef pThis, double ox, double oy, double oz)
static internal void	vtkGeoCamera_SetOriginLatitude_31 (HandleRef pThis, double oLat)
static internal void	vtkGeoCamera_SetOriginLongitude_32 (HandleRef pThis, double oLat)
static internal void	vtkGeoCamera_SetTilt_33 (HandleRef pThis, double tilt)
Static Private Member Functions
static	vtkGeoCamera ()
	Automatically generated type registration mechanics.

Detailed Description

vtkGeoCamera - Geo interface to a camera.

Description I wanted to hide the normal vtkCamera API so I did not make this a subclass. The camera is a helper object. You can get a pointer to the camera, but it should be treated like a const.

Constructor & Destructor Documentation

static Kitware.VTK.vtkGeoCamera.vtkGeoCamera ( ) [static, private]

Automatically generated type registration mechanics.

Kitware.VTK.vtkGeoCamera.vtkGeoCamera	(	IntPtr	rawCppThis,
		bool	callDisposalMethod,
		bool	strong
	)

Automatically generated constructor - called from generated code. DO NOT call directly.

Kitware.VTK.vtkGeoCamera.vtkGeoCamera ( )

Undocumented Block.

Member Function Documentation

override void Kitware.VTK.vtkGeoCamera.Dispose ( bool disposing ) [protected]

Automatically generated protected Dispose method - called from public Dispose or the C# destructor. DO NOT call directly.

Reimplemented from Kitware.VTK.vtkObject.

virtual double Kitware.VTK.vtkGeoCamera.GetDistance ( ) [virtual]

Distance is in Meters Relative to Longitude and Latitude. above sea level ???? should we make this from center of earth ???? ???? what about equatorial bulge ????

virtual double Kitware.VTK.vtkGeoCamera.GetHeading ( ) [virtual]

Heading is in degrees: (-180->180) Relative to Logitude and Latitude. 0 is north. 90 is east. ???? what is the standard ???? 180 is south.

-90 is west. Rotate Heading around -y axis Center,

virtual double Kitware.VTK.vtkGeoCamera.GetLatitude ( ) [virtual]

Latitude is in degrees: (-90->90) Relative to Longitude. Rotate Latitude around x axis by Latitude,.

virtual bool Kitware.VTK.vtkGeoCamera.GetLockHeading ( ) [virtual]

Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes.

virtual double Kitware.VTK.vtkGeoCamera.GetLongitude ( ) [virtual]

Longitude is in degrees: (-180->180) Relative to absolute coordinates. Rotate Longitude around z axis (earth axis),.

double Kitware.VTK.vtkGeoCamera.GetNodeCoverage ( vtkGeoTerrainNode node )

This method estimates how much of the view is covered by the sphere. Returns a value from 0 to 1.

virtual double [] Kitware.VTK.vtkGeoCamera.GetOrigin ( ) [virtual]

Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points.

virtual void Kitware.VTK.vtkGeoCamera.GetOrigin	(	ref double	_arg1,
		ref double	_arg2,
		ref double	_arg3
	)		`[virtual]`

Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points.

virtual void Kitware.VTK.vtkGeoCamera.GetOrigin ( IntPtr _arg ) [virtual]

Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points.

virtual double Kitware.VTK.vtkGeoCamera.GetOriginLatitude ( ) [virtual]

This point is shifted to 0,0,0 to avoid openGL issues.

virtual double Kitware.VTK.vtkGeoCamera.GetOriginLongitude ( ) [virtual]

This point is shifted to 0,0,0 to avoid openGL issues.

virtual double [] Kitware.VTK.vtkGeoCamera.GetPosition ( ) [virtual]

Get the world position without the origin shift.

virtual void Kitware.VTK.vtkGeoCamera.GetPosition	(	ref double	_arg1,
		ref double	_arg2,
		ref double	_arg3
	)		`[virtual]`

Get the world position without the origin shift.

virtual void Kitware.VTK.vtkGeoCamera.GetPosition ( IntPtr _arg ) [virtual]

Get the world position without the origin shift.

virtual double Kitware.VTK.vtkGeoCamera.GetTilt ( ) [virtual]

Tilt is also know as pitch. Tilt is in degrees: (0->90) Relative to Longitude, Latitude, and Heading. Rotate Tilt around x axis,.

vtkCamera Kitware.VTK.vtkGeoCamera.GetVTKCamera ( )

This vtk camera is updated to match this geo cameras state. It should be treated as a const and should not be modified.

Here is the call graph for this function:

void Kitware.VTK.vtkGeoCamera.InitializeNodeAnalysis ( IntPtr rendererSize )

We precompute some values to speed up update of the terrain. Unfortunately, they have to be manually/explicitly updated when the camera or renderer size changes.

override int Kitware.VTK.vtkGeoCamera.IsA ( string type ) [virtual]

Undocumented Block.

Reimplemented from Kitware.VTK.vtkObject.

static new int Kitware.VTK.vtkGeoCamera.IsTypeOf ( string type ) [static]

Undocumented Block.

Reimplemented from Kitware.VTK.vtkObject.

virtual void Kitware.VTK.vtkGeoCamera.LockHeadingOff ( ) [virtual]

Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes.

virtual void Kitware.VTK.vtkGeoCamera.LockHeadingOn ( ) [virtual]

Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes.

static new vtkGeoCamera Kitware.VTK.vtkGeoCamera.New ( ) [static]

Undocumented Block.

Reimplemented from Kitware.VTK.vtkObject.

new vtkGeoCamera Kitware.VTK.vtkGeoCamera.NewInstance ( )

Undocumented Block.

Reimplemented from Kitware.VTK.vtkObject.

static new vtkGeoCamera Kitware.VTK.vtkGeoCamera.SafeDownCast ( vtkObjectBase o ) [static]

Undocumented Block.

Reimplemented from Kitware.VTK.vtkObject.

Here is the call graph for this function:

void Kitware.VTK.vtkGeoCamera.SetDistance ( double Distance )

Distance is in Meters Relative to Longitude and Latitude. above sea level ???? should we make this from center of earth ???? ???? what about equatorial bulge ????

void Kitware.VTK.vtkGeoCamera.SetHeading ( double heading )

Heading is in degrees: (-180->180) Relative to Logitude and Latitude. 0 is north. 90 is east. ???? what is the standard ???? 180 is south.

-90 is west. Rotate Heading around -y axis Center,

void Kitware.VTK.vtkGeoCamera.SetLatitude ( double latitude )

Latitude is in degrees: (-90->90) Relative to Longitude. Rotate Latitude around x axis by Latitude,.

virtual void Kitware.VTK.vtkGeoCamera.SetLockHeading ( bool _arg ) [virtual]

Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes.

void Kitware.VTK.vtkGeoCamera.SetLongitude ( double longitude )

Longitude is in degrees: (-180->180) Relative to absolute coordinates. Rotate Longitude around z axis (earth axis),.

void Kitware.VTK.vtkGeoCamera.SetOrigin	(	double	ox,
		double	oy,
		double	oz
	)

Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points.

void Kitware.VTK.vtkGeoCamera.SetOriginLatitude ( double oLat )

This point is shifted to 0,0,0 to avoid openGL issues.

void Kitware.VTK.vtkGeoCamera.SetOriginLongitude ( double oLat )

This point is shifted to 0,0,0 to avoid openGL issues.

void Kitware.VTK.vtkGeoCamera.SetTilt ( double tilt )

Tilt is also know as pitch. Tilt is in degrees: (0->90) Relative to Longitude, Latitude, and Heading. Rotate Tilt around x axis,.

static internal double Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetDistance_01 ( HandleRef pThis ) [private]

static internal double Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetHeading_02 ( HandleRef pThis ) [private]

static internal double Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetLatitude_03 ( HandleRef pThis ) [private]

static internal byte Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetLockHeading_04 ( HandleRef pThis ) [private]

static internal double Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetLongitude_05 ( HandleRef pThis ) [private]

static internal double Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetNodeCoverage_06	(	HandleRef	pThis,
		HandleRef	node
	)		`[private]`

static internal IntPtr Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetOrigin_07 ( HandleRef pThis ) [private]

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetOrigin_08	(	HandleRef	pThis,
		ref double	_arg1,
		ref double	_arg2,
		ref double	_arg3
	)		`[private]`

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetOrigin_09	(	HandleRef	pThis,
		IntPtr	_arg
	)		`[private]`

static internal double Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetOriginLatitude_10 ( HandleRef pThis ) [private]

static internal double Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetOriginLongitude_11 ( HandleRef pThis ) [private]

static internal IntPtr Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetPosition_12 ( HandleRef pThis ) [private]

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetPosition_13	(	HandleRef	pThis,
		ref double	_arg1,
		ref double	_arg2,
		ref double	_arg3
	)		`[private]`

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetPosition_14	(	HandleRef	pThis,
		IntPtr	_arg
	)		`[private]`

static internal double Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetTilt_15 ( HandleRef pThis ) [private]

static internal IntPtr Kitware.VTK.vtkGeoCamera.vtkGeoCamera_GetVTKCamera_16	(	HandleRef	pThis,
		ref uint	mteStatus,
		ref uint	mteIndex,
		ref uint	rawRefCount
	)		`[private]`

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_InitializeNodeAnalysis_17	(	HandleRef	pThis,
		IntPtr	rendererSize
	)		`[private]`

static internal int Kitware.VTK.vtkGeoCamera.vtkGeoCamera_IsA_18	(	HandleRef	pThis,
		string	type
	)		`[private]`

static internal int Kitware.VTK.vtkGeoCamera.vtkGeoCamera_IsTypeOf_19 ( string type ) [private]

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_LockHeadingOff_20 ( HandleRef pThis ) [private]

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_LockHeadingOn_21 ( HandleRef pThis ) [private]

static internal IntPtr Kitware.VTK.vtkGeoCamera.vtkGeoCamera_New	(	ref uint	mteStatus,
		ref uint	mteIndex,
		ref uint	rawRefCount
	)		`[private]`

static internal IntPtr Kitware.VTK.vtkGeoCamera.vtkGeoCamera_NewInstance_23	(	HandleRef	pThis,
		ref uint	mteStatus,
		ref uint	mteIndex,
		ref uint	rawRefCount
	)		`[private]`

static internal IntPtr Kitware.VTK.vtkGeoCamera.vtkGeoCamera_SafeDownCast_24	(	HandleRef	o,
		ref uint	mteStatus,
		ref uint	mteIndex,
		ref uint	rawRefCount
	)		`[private]`

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_SetDistance_25	(	HandleRef	pThis,
		double	Distance
	)		`[private]`

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_SetHeading_26	(	HandleRef	pThis,
		double	heading
	)		`[private]`

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_SetLatitude_27	(	HandleRef	pThis,
		double	latitude
	)		`[private]`

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_SetLockHeading_28	(	HandleRef	pThis,
		byte	_arg
	)		`[private]`

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_SetLongitude_29	(	HandleRef	pThis,
		double	longitude
	)		`[private]`

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_SetOrigin_30	(	HandleRef	pThis,
		double	ox,
		double	oy,
		double	oz
	)		`[private]`

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_SetOriginLatitude_31	(	HandleRef	pThis,
		double	oLat
	)		`[private]`

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_SetOriginLongitude_32	(	HandleRef	pThis,
		double	oLat
	)		`[private]`

static internal void Kitware.VTK.vtkGeoCamera.vtkGeoCamera_SetTilt_33	(	HandleRef	pThis,
		double	tilt
	)		`[private]`

Member Data Documentation

new readonly string Kitware.VTK.vtkGeoCamera.MRClassNameKey = "12vtkGeoCamera" [static]

Automatically generated type registration mechanics.

Reimplemented from Kitware.VTK.vtkObject.

new const string Kitware.VTK.vtkGeoCamera.MRFullTypeName = "Kitware.VTK.vtkGeoCamera"

Automatically generated type registration mechanics.

Reimplemented from Kitware.VTK.vtkObject.

The documentation for this class was generated from the following file:

csharp/vtkGeoCamera.cs

Public Member Functions

Static Public Member Functions

Public Attributes

Static Public Attributes

Protected Member Functions

Private Member Functions

Static Private Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation