vtkExtentSplitter - Split an extent across other extents. More...

Inheritance diagram for Kitware.VTK.vtkExtentSplitter:

Collaboration diagram for Kitware.VTK.vtkExtentSplitter:

Public Member Functions
	vtkExtentSplitter (IntPtr rawCppThis, bool callDisposalMethod, bool strong)
	Automatically generated constructor - called from generated code. DO NOT call directly.
	vtkExtentSplitter ()
	Undocumented Block.
void	AddExtent (int x0, int x1, int y0, int y1, int z0, int z1)
	Add an extent to the queue of extents to be split among the available sources.
void	AddExtent (IntPtr extent)
	Add an extent to the queue of extents to be split among the available sources.
void	AddExtentSource (int id, int priority, int x0, int x1, int y0, int y1, int z0, int z1)
	Add/Remove a source providing the given extent. Sources with higher priority numbers are favored. Source id numbers and priorities must be non-negative.
void	AddExtentSource (int id, int priority, IntPtr extent)
	Add/Remove a source providing the given extent. Sources with higher priority numbers are favored. Source id numbers and priorities must be non-negative.
int	ComputeSubExtents ()
	Split the extents currently in the queue among the available sources. The queue is empty when this returns. Returns 1 if all extents could be read. Returns 0 if any portion of any extent was not available through any source.
int	GetNumberOfSubExtents ()
	Get the number of sub-extents into which the original set of extents have been split across the available sources. Valid after a call to ComputeSubExtents.
virtual int	GetPointMode ()
	Get/Set whether "point mode" is on. In point mode, sub-extents are generated to ensure every point in the update request is read, but not necessarily every cell. This can be used when point data are stored in a planar slice per piece with no cell data. The default is OFF.
int[]	GetSubExtent (int index)
	Get the sub-extent associated with the given index. Use GetSubExtentSource to get the id of the source from which this sub-extent should be read. Valid after a call to ComputeSubExtents.
void	GetSubExtent (int index, IntPtr extent)
	Get the sub-extent associated with the given index. Use GetSubExtentSource to get the id of the source from which this sub-extent should be read. Valid after a call to ComputeSubExtents.
int	GetSubExtentSource (int index)
	Get the id of the source from which the sub-extent associated with the given index should be read. Returns -1 if no source provides the sub-extent.
override int	IsA (string type)
	Undocumented Block.
new vtkExtentSplitter	NewInstance ()
	Undocumented Block.
virtual void	PointModeOff ()
	Get/Set whether "point mode" is on. In point mode, sub-extents are generated to ensure every point in the update request is read, but not necessarily every cell. This can be used when point data are stored in a planar slice per piece with no cell data. The default is OFF.
virtual void	PointModeOn ()
	Get/Set whether "point mode" is on. In point mode, sub-extents are generated to ensure every point in the update request is read, but not necessarily every cell. This can be used when point data are stored in a planar slice per piece with no cell data. The default is OFF.
void	RemoveAllExtentSources ()
	Add/Remove a source providing the given extent. Sources with higher priority numbers are favored. Source id numbers and priorities must be non-negative.
void	RemoveExtentSource (int id)
	Add/Remove a source providing the given extent. Sources with higher priority numbers are favored. Source id numbers and priorities must be non-negative.
virtual void	SetPointMode (int _arg)
	Get/Set whether "point mode" is on. In point mode, sub-extents are generated to ensure every point in the update request is read, but not necessarily every cell. This can be used when point data are stored in a planar slice per piece with no cell data. The default is OFF.
Static Public Member Functions
static new vtkExtentSplitter	New ()
	Undocumented Block.
static new int	IsTypeOf (string type)
	Undocumented Block.
static new vtkExtentSplitter	SafeDownCast (vtkObjectBase o)
	Undocumented Block.
Public Attributes
new const string	MRFullTypeName = "Kitware.VTK.vtkExtentSplitter"
	Automatically generated type registration mechanics.
Static Public Attributes
static new readonly string	MRClassNameKey = "17vtkExtentSplitter"
	Automatically generated type registration mechanics.
Protected Member Functions
override void	Dispose (bool disposing)
	Automatically generated protected Dispose method - called from public Dispose or the C# destructor. DO NOT call directly.
Private Member Functions
static internal IntPtr	vtkExtentSplitter_New (ref uint mteStatus, ref uint mteIndex, ref uint rawRefCount)
static internal void	vtkExtentSplitter_AddExtent_01 (HandleRef pThis, int x0, int x1, int y0, int y1, int z0, int z1)
static internal void	vtkExtentSplitter_AddExtent_02 (HandleRef pThis, IntPtr extent)
static internal void	vtkExtentSplitter_AddExtentSource_03 (HandleRef pThis, int id, int priority, int x0, int x1, int y0, int y1, int z0, int z1)
static internal void	vtkExtentSplitter_AddExtentSource_04 (HandleRef pThis, int id, int priority, IntPtr extent)
static internal int	vtkExtentSplitter_ComputeSubExtents_05 (HandleRef pThis)
static internal int	vtkExtentSplitter_GetNumberOfSubExtents_06 (HandleRef pThis)
static internal int	vtkExtentSplitter_GetPointMode_07 (HandleRef pThis)
static internal IntPtr	vtkExtentSplitter_GetSubExtent_08 (HandleRef pThis, int index)
static internal void	vtkExtentSplitter_GetSubExtent_09 (HandleRef pThis, int index, IntPtr extent)
static internal int	vtkExtentSplitter_GetSubExtentSource_10 (HandleRef pThis, int index)
static internal int	vtkExtentSplitter_IsA_11 (HandleRef pThis, string type)
static internal int	vtkExtentSplitter_IsTypeOf_12 (string type)
static internal IntPtr	vtkExtentSplitter_NewInstance_14 (HandleRef pThis, ref uint mteStatus, ref uint mteIndex, ref uint rawRefCount)
static internal void	vtkExtentSplitter_PointModeOff_15 (HandleRef pThis)
static internal void	vtkExtentSplitter_PointModeOn_16 (HandleRef pThis)
static internal void	vtkExtentSplitter_RemoveAllExtentSources_17 (HandleRef pThis)
static internal void	vtkExtentSplitter_RemoveExtentSource_18 (HandleRef pThis, int id)
static internal IntPtr	vtkExtentSplitter_SafeDownCast_19 (HandleRef o, ref uint mteStatus, ref uint mteIndex, ref uint rawRefCount)
static internal void	vtkExtentSplitter_SetPointMode_20 (HandleRef pThis, int _arg)
Static Private Member Functions
static	vtkExtentSplitter ()
	Automatically generated type registration mechanics.

Detailed Description

vtkExtentSplitter - Split an extent across other extents.

Description vtkExtentSplitter splits each input extent into non-overlapping sub-extents that are completely contained within other "source extents". A source extent corresponds to some resource providing an extent. Each source extent has an integer identifier, integer priority, and an extent. The input extents are split into sub-extents according to priority, availability, and amount of overlap of the source extents. This can be used by parallel data readers to read as few piece files as possible.

Constructor & Destructor Documentation

static Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter ( ) [static, private]

Automatically generated type registration mechanics.

Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter	(	IntPtr	rawCppThis,
		bool	callDisposalMethod,
		bool	strong
	)

Automatically generated constructor - called from generated code. DO NOT call directly.

Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter ( )

Undocumented Block.

Member Function Documentation

void Kitware.VTK.vtkExtentSplitter.AddExtent	(	int	x0,
		int	x1,
		int	y0,
		int	y1,
		int	z0,
		int	z1
	)

Add an extent to the queue of extents to be split among the available sources.

void Kitware.VTK.vtkExtentSplitter.AddExtent ( IntPtr extent )

Add an extent to the queue of extents to be split among the available sources.

void Kitware.VTK.vtkExtentSplitter.AddExtentSource	(	int	id,
		int	priority,
		int	x0,
		int	x1,
		int	y0,
		int	y1,
		int	z0,
		int	z1
	)

Add/Remove a source providing the given extent. Sources with higher priority numbers are favored. Source id numbers and priorities must be non-negative.

void Kitware.VTK.vtkExtentSplitter.AddExtentSource	(	int	id,
		int	priority,
		IntPtr	extent
	)

Add/Remove a source providing the given extent. Sources with higher priority numbers are favored. Source id numbers and priorities must be non-negative.

int Kitware.VTK.vtkExtentSplitter.ComputeSubExtents ( )

Split the extents currently in the queue among the available sources. The queue is empty when this returns. Returns 1 if all extents could be read. Returns 0 if any portion of any extent was not available through any source.

override void Kitware.VTK.vtkExtentSplitter.Dispose ( bool disposing ) [protected]

Automatically generated protected Dispose method - called from public Dispose or the C# destructor. DO NOT call directly.

Reimplemented from Kitware.VTK.vtkObject.

int Kitware.VTK.vtkExtentSplitter.GetNumberOfSubExtents ( )

Get the number of sub-extents into which the original set of extents have been split across the available sources. Valid after a call to ComputeSubExtents.

virtual int Kitware.VTK.vtkExtentSplitter.GetPointMode ( ) [virtual]

Get/Set whether "point mode" is on. In point mode, sub-extents are generated to ensure every point in the update request is read, but not necessarily every cell. This can be used when point data are stored in a planar slice per piece with no cell data. The default is OFF.

int [] Kitware.VTK.vtkExtentSplitter.GetSubExtent ( int index )

Get the sub-extent associated with the given index. Use GetSubExtentSource to get the id of the source from which this sub-extent should be read. Valid after a call to ComputeSubExtents.

void Kitware.VTK.vtkExtentSplitter.GetSubExtent	(	int	index,
		IntPtr	extent
	)

Get the sub-extent associated with the given index. Use GetSubExtentSource to get the id of the source from which this sub-extent should be read. Valid after a call to ComputeSubExtents.

int Kitware.VTK.vtkExtentSplitter.GetSubExtentSource ( int index )

Get the id of the source from which the sub-extent associated with the given index should be read. Returns -1 if no source provides the sub-extent.

override int Kitware.VTK.vtkExtentSplitter.IsA ( string type ) [virtual]

Undocumented Block.

Reimplemented from Kitware.VTK.vtkObject.

static new int Kitware.VTK.vtkExtentSplitter.IsTypeOf ( string type ) [static]

Undocumented Block.

Reimplemented from Kitware.VTK.vtkObject.

static new vtkExtentSplitter Kitware.VTK.vtkExtentSplitter.New ( ) [static]

Undocumented Block.

Reimplemented from Kitware.VTK.vtkObject.

new vtkExtentSplitter Kitware.VTK.vtkExtentSplitter.NewInstance ( )

Undocumented Block.

Reimplemented from Kitware.VTK.vtkObject.

virtual void Kitware.VTK.vtkExtentSplitter.PointModeOff ( ) [virtual]

Get/Set whether "point mode" is on. In point mode, sub-extents are generated to ensure every point in the update request is read, but not necessarily every cell. This can be used when point data are stored in a planar slice per piece with no cell data. The default is OFF.

virtual void Kitware.VTK.vtkExtentSplitter.PointModeOn ( ) [virtual]

Get/Set whether "point mode" is on. In point mode, sub-extents are generated to ensure every point in the update request is read, but not necessarily every cell. This can be used when point data are stored in a planar slice per piece with no cell data. The default is OFF.

void Kitware.VTK.vtkExtentSplitter.RemoveAllExtentSources ( )

Add/Remove a source providing the given extent. Sources with higher priority numbers are favored. Source id numbers and priorities must be non-negative.

void Kitware.VTK.vtkExtentSplitter.RemoveExtentSource ( int id )

Add/Remove a source providing the given extent. Sources with higher priority numbers are favored. Source id numbers and priorities must be non-negative.

static new vtkExtentSplitter Kitware.VTK.vtkExtentSplitter.SafeDownCast ( vtkObjectBase o ) [static]

Undocumented Block.

Reimplemented from Kitware.VTK.vtkObject.

Here is the call graph for this function:

virtual void Kitware.VTK.vtkExtentSplitter.SetPointMode ( int _arg ) [virtual]

Get/Set whether "point mode" is on. In point mode, sub-extents are generated to ensure every point in the update request is read, but not necessarily every cell. This can be used when point data are stored in a planar slice per piece with no cell data. The default is OFF.

static internal void Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_AddExtent_01	(	HandleRef	pThis,
		int	x0,
		int	x1,
		int	y0,
		int	y1,
		int	z0,
		int	z1
	)		`[private]`

static internal void Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_AddExtent_02	(	HandleRef	pThis,
		IntPtr	extent
	)		`[private]`

static internal void Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_AddExtentSource_03	(	HandleRef	pThis,
		int	id,
		int	priority,
		int	x0,
		int	x1,
		int	y0,
		int	y1,
		int	z0,
		int	z1
	)		`[private]`

static internal void Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_AddExtentSource_04	(	HandleRef	pThis,
		int	id,
		int	priority,
		IntPtr	extent
	)		`[private]`

static internal int Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_ComputeSubExtents_05 ( HandleRef pThis ) [private]

static internal int Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_GetNumberOfSubExtents_06 ( HandleRef pThis ) [private]

static internal int Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_GetPointMode_07 ( HandleRef pThis ) [private]

static internal IntPtr Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_GetSubExtent_08	(	HandleRef	pThis,
		int	index
	)		`[private]`

static internal void Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_GetSubExtent_09	(	HandleRef	pThis,
		int	index,
		IntPtr	extent
	)		`[private]`

static internal int Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_GetSubExtentSource_10	(	HandleRef	pThis,
		int	index
	)		`[private]`

static internal int Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_IsA_11	(	HandleRef	pThis,
		string	type
	)		`[private]`

static internal int Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_IsTypeOf_12 ( string type ) [private]

static internal IntPtr Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_New	(	ref uint	mteStatus,
		ref uint	mteIndex,
		ref uint	rawRefCount
	)		`[private]`

static internal IntPtr Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_NewInstance_14	(	HandleRef	pThis,
		ref uint	mteStatus,
		ref uint	mteIndex,
		ref uint	rawRefCount
	)		`[private]`

static internal void Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_PointModeOff_15 ( HandleRef pThis ) [private]

static internal void Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_PointModeOn_16 ( HandleRef pThis ) [private]

static internal void Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_RemoveAllExtentSources_17 ( HandleRef pThis ) [private]

static internal void Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_RemoveExtentSource_18	(	HandleRef	pThis,
		int	id
	)		`[private]`

static internal IntPtr Kitware.VTK.vtkExtentSplitter.vtkExtentSplitter_SafeDownCast_19	(	HandleRef	o,
		ref uint	mteStatus,
		ref uint	mteIndex,
		ref uint	rawRefCount
	)		`[private]`