Infinite Impulse Response (IIR) Lattice Filters

Functions
void	ne10_iir_lattice_float_c (const ne10_iir_lattice_instance_f32_t *S, ne10_float32_t *pSrc, ne10_float32_t *pDst, ne10_uint32_t blockSize)
	Processing function for the floating-point IIR lattice filter. More...

Detailed Description

This set of functions implements lattice filters for and floating-point data types. Lattice filters are used in a variety of adaptive filter applications. The filter structure has feedforward and feedback components and the net impulse response is infinite length. The functions operate on blocks of input and output data and each call to the function processes blockSize samples through the filter. pSrc and pDst point to input and output arrays containing blockSize values.

Algorithm:

Infinite Impulse Response Lattice filter

     fN(n)   =  x(n)
     fm-1(n) = fm(n) - km * gm-1(n-1)   for m = N, N-1, ...1
     gm(n)   = km * fm-1(n) + gm-1(n-1) for m = N, N-1, ...1
     y(n)    = vN * gN(n) + vN-1 * gN-1(n) + ...+ v0 * g0(n)
  

pkCoeffs points to array of reflection coefficients of size numStages. Reflection coefficients are stored in time-reversed order.

     {kN, kN-1, ....k1}
  

pvCoeffs points to the array of ladder coefficients of size (numStages+1). Ladder coefficients are stored in time-reversed order.

     v0, v1, ...vN
  

pState points to a state array of size numStages + blockSize. The state variables shown in the figure above (the g values) are stored in the pState array. The state variables are updated after each block of data is processed; the coefficients are untouched.

Instance Structure

The coefficients and state variables for a filter are stored together in an instance data structure. A separate instance structure must be defined for each filter. Coefficient arrays may be shared among several instances while state variable arrays cannot be shared. There are separate instance structure declarations for each of the 3 supported data types.

Initialization Functions

There is also an associated initialization function for each data type. The initialization function performs the following operations:

• Sets the values of the internal structure fields.
• Zeros out the values in the state buffer.

Use of the initialization function is optional. However, if the initialization function is used, then the instance structure cannot be placed into a const data section. To place an instance structure into a const data section, the instance structure must be manually initialized. Set the values in the state buffer to zeros and then manually initialize the instance structure as follows:

*arm_iir_lattice_instance_f32 S = {numStages, pState, pkCoeffs, pvCoeffs};
  

where numStages is the number of stages in the filter; pState points to the state buffer array; pkCoeffs points to array of the reflection coefficients; pvCoeffs points to the array of ladder coefficients.

Fixed-Point Behavior

Care must be taken when using the fixed-point versions of the IIR lattice filter functions. In particular, the overflow and saturation behavior of the accumulator used in each function must be considered. Refer to the function specific documentation below for usage guidelines.

Function Documentation

ne10_iir_lattice_float_c()

void ne10_iir_lattice_float_c	(	const ne10_iir_lattice_instance_f32_t *	S,
		ne10_float32_t *	pSrc,
		ne10_float32_t *	pDst,
		ne10_uint32_t	blockSize
	)

Processing function for the floating-point IIR lattice filter.

Parameters

[in]	*S	points to an instance of the floating-point IIR lattice structure.
[in]	*pSrc	points to the block of input data.
[out]	*pDst	points to the block of output data.
[in]	blockSize	number of samples to process.

Returns

none.

Definition at line 118 of file NE10_iir.c.